final sub setup, need to make sure its ok

[▼)Ñ╩fZΣµ& 10+ year member]

ok so i m planning on getting

2 kicker CVR 12" DVC 2 ohm subs

kicker 750.1 amp

this 4 gauge wiring kit, http://www.sonicelectronix.com/item_7575_American+Accessories+Power+Kit-8.html

and a ported box

my question is would all this work fine? like is the wiring kit decent?

i know the subs are average but i just want some bass behind the music

Click to read more...

 

[ThatChevyGuy 5,000+ posts]

Everything looks good, just be sure to wire to 2 ohm, not .5 ohm. I've never heard of american accessories, so i cant comment on that. If you want to get real loud, build or get built a custom ported box suited to the subs specs, over a prefab.

 

[▼)Ñ╩fZΣµ& 10+ year member]

ok, also just wondering with a box like this http://www.sonicelectronix.com/item_7509_Sonic+Sub+Box-+2SV12+-GRAY-.html#

and with the setup i have with only 1 amp, would i have problems wiring something like this since the terminals are on the opposite sides?

 

[zierbox 10+ year member]

Need to Know; Custom Box Info

--------------------------------------------------------------------------------

Just a note; All you guys wanting enclosure designed / built or what ever

I keep seeing all these air space or volume request with speaker size/ tuning frequencies and so-on

It is very important to know more information

like the type of vehicle and more

The environment (Vehicle) will seriously effect “ALL” these factors

An Experienced Subwoofer Enclosure Designer (not just builder)

Needs to account for All the variables

True available space

Locations and surroundings for new enclosure

Distance to the Listeners

The Acoustical Characteristics of the Environment (different vehicles and certain

locations inside of that vehicle will react differently

Power Demands

Audio Objective (Type of Music, Response and SPL Levels)

Cosmetics (Looks)

Cost (The Cost of a Custom Subwoofer Enclosure can go and be divided up in

many directions)

You can spend a lot of money on just Looks (Fiberglass, Paint, Vinyl, Plex, Neon,

ECT...)

You can spend a lot of money on Performance (SPL or Sound Quality)

It’s finding the right Balance for that particular Project

An Expensive Subwoofer and Amplifier dose Not Equal GOOD BASS

Straight cut MDF and a Box Program dose Not Equal GOOD BASS

 

[ThatChevyGuy 5,000+ posts]

Like i said, dont buy a prefab.