electrical for audiopipe ap30001d?

[slam 5,000+ posts]

Blueberry cheesecake FTMFW

 

[orangecounty1 10+ year member]

ew

 

[lostdaytomorrow 10+ year member]

I hope someone taught the OP how input voltage and the gain influence the output of the amplifier. This thread is retarded. If you don't want a HO alt. that's cool but stock alt's aren't made to run at full tilt day in and day out so I hope you're getting a good deal on the OEM alt. that you will burn up in a short time of running in full capacity.

 

[4-teh-lulz? 10+ year member]

 

[orangecounty1 10+ year member]

I hope someone taught the OP how input voltage and the gain influence the output of the amplifier. This thread is retarded. If you don't want a HO alt. that's cool but stock alt's aren't made to run at full tilt day in and day out so I hope you're getting a good deal on the OEM alt. that you will burn up in a short time of running in full capacity.

just a friendly FYI, last time i checked, as long as input voltage is at or above 12 volts, im PRETTY sure that will not damage an amplifier. thanks for your advice though on that.

and also, i cant stand people that say "all day" becuase NO one plays their shit full tilt ALL DAY. PERIOD.

so thanks for your input on that one as well.

 

[PioneerSPL1990 10+ year member]

i ran mine on a stock battery big 3, stock 105A alt, and a single 1800, the voltage went down after about 10 minutes, when i got a second 1800 it took forever to drain it down.