Found this online:
There are TWO HIDDEN screws that are accessed from below the "trim plate"
Anyway, here are the instructions from the factory manual:
1) Open the ashtray or the cupholder.
2) Remove the following sets of screws:
- Two screws from the front of the trim panel. For access to the front screws, remove the ashtray or the cupholder.
- Two screws from the bottom of the trim panel. For access to the bottom screws, remove the console storage box.
3) Use a small, flat-bladed tool in order to remove the upper tabs on the IP accessory trim plate from the instrument panel.
4) Disconnect the electrical connectors, if equipped.
5) Remove the IP accessory trim plate from the instrument panel.
Those 2 screws can be a REAL PAIN to find, if you don't know where to look. I will try to find a picture or drawing of them.