Crazy System Im building soon w/2 15" XXX's!!

[snb778 5,000+ posts]

Alright!! My car audio account is almost to where it has to be for me to put in the next system. Here it is, let me know what you think, any suggestions...sarcastic criticism............

2-15" RE Audio XXX's

1 Batcap 800m (do i need another one of these?)

Alpine 7876 HU

6 1/2" MB Quart DKD 113's (components)

A pair of Boston Acoustics Neo 5T System Tweets

6 1/2" Alpine Type R Components in the kicks

back dash has 5 1/2" Kicker Revolution? Components

Interior amp is Kicker 365x4

2- Autotek Stealth series 1500.1's

I cant wait. Give me another month to save up a little more money and I will be BUUUUMPIN!!. Is 6 ft^3 enough for these 2 ported...

Does this power sound right for this application?? Should I go smaller box and turn up the gains on the amp, or bigger box and turn em down??

Should I wait until the new replacements for the XXX's come out?

Click to read more...

 

[cjjackson85 5,000+ posts]

Should I wait until the new replacements for the XXX's come out?

You'll be waiting a while...

 

[g30ffr3y 10+ year member]

2 15" xxx will need more than 6 cubes.

 

[audiolife 5,000+ posts]

Alright!! My car audio account is almost to where it has to be for me to put in the next system. Here it is, let me know what you think, any suggestions...sarcastic criticism............
2-15" RE Audio XXX's

1 Batcap 800m (do i need another one of these?)

Alpine 7876 HU

6 1/2" MB Quart DKD 113's (components)

A pair of Boston Acoustics Neo 5T System Tweets

6 1/2" Alpine Type R Components in the kicks

back dash has 5 1/2" Kicker Revolution? Components

Interior amp is Kicker 365x4

2- Autotek Stealth series 1500.1's

I cant wait. Give me another month to save up a little more money and I will be BUUUUMPIN!!. Is 6 ft^3 enough for these 2 ported...

Does this power sound right for this application?? Should I go smaller box and turn up the gains on the amp, or bigger box and turn em down??

Should I wait until the new replacements for the XXX's come out?

i probably coulda saved you some loot on a battcap type replacement and i think you have far tooo many mids and highs lol

 

[snb778 5,000+ posts]

****, i thought they were comin out in a month or so....

Do they really need more than 3ft^3 each??!!

 

[snb778 5,000+ posts]

Naaaa I love sharp sound!!

 

[tRiGgEr 5,000+ posts]

8 cubes for the both of them.

Why are you purchasing a component set and some extra tweets?

The component set already comes with a pair of tweets...

 

[snb778 5,000+ posts]

ya.....i know this. I wanted more sharp Hi sounds

 

[audiolife 5,000+ posts]

ya.....i know this. I wanted more sharp Hi sounds

so many mixxed and matched sharpness all blairing in their locations mean the dullest ones will probably muddy up the rest of it. you went to mobile dynamics?

 

[azbass 5,000+ posts]

x2? MD did say the fewer speakers the better.

 

[tRiGgEr 5,000+ posts]

Ditch the extra tweets. They will not be needed.

Also please tell me you are seperating the two component sets. One in the back right?

 

[snb778 5,000+ posts]

yes one is in the back dash. I mean come on....3000 watts into 2 XXX 15's is gonna need a lot of mid and high to balance it. Yea yea i have more than most people would want but hey thats my personal preference.

I know im not suposed to mix and match like I do but im on a tight budget, so I jsut threw whatever I had in the car. I PROBABLY will ditch the Boston Acoustics Tweets once i get the Type R's

 

[snb778 5,000+ posts]

Is 1500 watts to much for 4ft ^3 for each sub

 

[tRiGgEr 5,000+ posts]

Nope. 1500 watts will probably be a perfect match, depending on tunning and port area.

As long as you keep the components seperate(front/rear) you should be fine. Just don't try running 4 tweets up front. Unless you are teh master Jedi installer. It's bound to come out bad.

 

[tRiGgEr 5,000+ posts]

Ohh and I hope you plan on purchasing a new alt/or dual alts