I’m finally getting around to overhauling my 2009 F-150 Screw. My current system is a 2 way passive component set up front using ID CXS 64’s off of a Diamond D5 2 channel. I have some old Eclipse 6x8 coaxials for rear fill and my sub stage is 2 IDQ 10’s in a FoxBox that I sealed and is downfiring powered off of a JBL GTR-1001.
My next equipment will be as follows;
1/0 OFC Sky High for power and grounds
14 gauge OFC Sky High for speakers
Tsunami ANL fuse up front and Tsunami distro in the back
T-Spec RCA’s for the 4 channel and Stinger 8000 for the sub channel
JVC KW-V830BT (will be running active through this to start)
Stereo Integrity M25’s for tweeters
Stereo Integrity TM65III’s for midrange/midbass
Zapco ST-4D or Pioneer GM-8704 for 4 channel duty (likely the Zapco)
SSA Icon 12 (no upgrades)
Wolfram W-3000.1 or US Acoustics Mike for sub (likely Wolfram to combat box rise)
Box will be aero ported and I’m unsure exactly what it’ll look like but will go to Buck for design.
This will be a slow build as it is hard to find free time right now with work and kids.
My next equipment will be as follows;
1/0 OFC Sky High for power and grounds
14 gauge OFC Sky High for speakers
Tsunami ANL fuse up front and Tsunami distro in the back
T-Spec RCA’s for the 4 channel and Stinger 8000 for the sub channel
JVC KW-V830BT (will be running active through this to start)
Stereo Integrity M25’s for tweeters
Stereo Integrity TM65III’s for midrange/midbass
Zapco ST-4D or Pioneer GM-8704 for 4 channel duty (likely the Zapco)
SSA Icon 12 (no upgrades)
Wolfram W-3000.1 or US Acoustics Mike for sub (likely Wolfram to combat box rise)
Box will be aero ported and I’m unsure exactly what it’ll look like but will go to Buck for design.
This will be a slow build as it is hard to find free time right now with work and kids.