Can someone please help me

[djheadless24 10+ year member]

Hey can someone help me design a box that holds 4 15 inch kicker cvrs... the box it going in to a back of a blazer

Click to read more...

 

[rpfuror 10+ year member]

give more info, I can design you 100 boxes but with out input they would be worthless.

needs=

tuning freq

MAX WxLxH

 

[mikey060 10+ year member]

definatly need info:veryhapp:

 

[PV Audio 5,000+ posts]

I think his usertext sums up this thread!

Oh, and Ortiz is a ****ing beast.

 

[rpfuror 10+ year member]

given dimentions:

the max i can have i need a box that will make those 4 15s pound hard i mean hard

lenth= 33"

height= 33"

deep= 20"

tough driver placement.

heres the box I came up with 10 cu/ft @ 32Hz.

 

[Josh #44 10+ year member]

They would need more than 2.5 each, right?

 

[rpfuror 10+ year member]

kicker specs 3 cu/ft, but with the constrants given, thats the best you can get.

now if you give another 10 inches in in any direction, then there are hundreds of options.

or of course loose a driver somewhere... actually, with the amount of space given the system would probally preform alot better with 3 drivers then 4 at the same power.

 

[PowerNaudio 10+ year member]

i would say 15cuft net tuned to 30Hz and no less then 112 sqin of port area. i would go a little bigger. it would be loud and you would still get a very strong low end bass.

 

[PV Audio 5,000+ posts]

given dimentions:
the max i can have i need a box that will make those 4 15s pound hard i mean hard

lenth= 33"

height= 33"

deep= 20"

tough driver placement.

heres the box I came up with 10 cu/ft @ 32Hz.

I wouldn't recommend putting the speakers on different planes. Rather, I would make a CRX style box and have the four speakers on top.

 

[PowerNaudio 10+ year member]

why would it make a diffrence? cancellation?

 

[rpfuror 10+ year member]

I wouldn't recommend putting the speakers on different planes. Rather, I would make a CRX style box and have the four speakers on top.

I agree, but in this case that type of box would either be 33x33x22 or 8 cu/ft and thats even worst then the previous design.

When it comes down to it to fit the same requirements its probally better to use less drivers.

I think of it this way. If I can build a 10.5 cu/ft box with the specs given and use 2 drivers both in an ideal condition why not, then all you would have to do is cutt 2 more holes if you not happy.

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[PV Audio 5,000+ posts]

why would it make a diffrence? cancellation?

Ideally, you don't want the speakers firing directly into each other. You get cancellation issues pretty bad.

 

[PV Audio 5,000+ posts]

I agree, but in this case that type of box would either be 33x33x22 or 8 cu/ft and thats even worst then the previous design.
When it comes down to it to fit the same requirements its probally better to use less drivers.

I think of it this way. If I can build a 10.5 cu/ft box with the specs given and use 2 drivers both in an ideal condition why not, then all you would have to do is cutt 2 more holes if you not happy.

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Yes I know, I'm just saying though. It's not like he gave us any dimensions anyway lol //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[Pyro_By_Nature 5,000+ posts]

Ideally, you don't want the speakers firing directly into each other. You get cancellation issues pretty bad.

Internally, that can be solved.If you were commenting about externally, you must not look at any SPL installs that maximize which way the vehicle likes subs/ports placed.