Budget system

[tmilla 10+ year member]

how does this sound for a 1 ft^3 enclosure

24"w x 12"h x 6"d

i believe the mounting depth is 5 5/8"

will the back of the sub be to close to the back of the box or does it matter?

 

[SSS 18734 5,000+ posts]

Try at least 7" mounting depth, so the pole vent has adequate ventilation

p.s. I would strongly urge you make a ported box. My 2000SPL's did not like sealed.

Nice setup for 120 bucks by the way. Don't forget you need to spend money on wiring and the box, though.

 

[tmilla 10+ year member]

it has to fit in a reg cab truck so ported is out of the question

7 may be a lil deep hold on ill go check......

7 is do able proly

could i bring the hight down to 11 or is that to short for a 10" sub

 

[SSS 18734 5,000+ posts]

it has to fit in a reg cab truck so ported is out of the question7 may be a lil deep hold on ill go check......

7 is do able proly

could i bring the hight down to 11 or is that to short for a 10" sub

Do 6.5" depth to save a little space, 11" wide/tall would be fine.

I would basically find my dimensions and make the biggest box possible if its going to be sealed //content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

 

[tmilla 10+ year member]

you mean 11" tall right?

 

[SSS 18734 5,000+ posts]

you mean 11" tall right?

//content.invisioncic.com/y282845/emoticons/blush.gif.99bc659ee2012b7d826165e26fb5eebe.gif right

 

[tmilla 10+ year member]

ok thanks a lot man for all your help