Box help

  • 3
    Participant count
  • Participant list

MrFoca

CarAudio.com Veteran
2,840
0
MD
Hey guys I bought a 18 RE SX off a member here. After doing some measurements I came up with just around 5 cf of room to build. I can go bigger but would require me to do a in trunk build which I don't feel like doing. So my question is, does this sub require the 5.5-8.0 cf of room ? If it does then it's fine I can go a different route. Just wanted to see if people used this. And what size enclosure you used. I have a 2013 VW CC and the truck is big, but the opening is smaller which makes it hard to get any decent box in there. Thanks for any input.

 
I wouldn't run that sub in a small box. I'd sooner buy a smaller sub that would perform well in the available space.
That's not a problem. I know on RE website it says like 5.5 for compact and 8.0 for optimal output. That's why I am asking before wasting time & money. Thinking of doing a multiple setup with 8's instead.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
900
I've used that driver and the ported box is closer to about 2 cubes. We did 1 in a stuffed/sealed 1-1.25 cubic foot box, stuffed with 1 lb of...
2
609
Absolutely. I am always learning and think it's probably impossible to stop learning. I appreciate the advice and don't doubt for a second the...
56
3K
People didn't like ported boxes because the port noise and needing a bigger box. Therefore, instead of 1-sub in a ported, they would go with...
30
3K

About this thread

MrFoca

CarAudio.com Veteran
Thread starter
MrFoca
Joined
Location
MD
Start date
Participants
Who Replied
Replies
4
Views
642
Last reply date
Last reply from
MrFoca
Image 5-2-24 at 8.16 PM (1).jpeg

slater

    May 2, 2024
  • 0
  • 0
Image 5-2-24 at 8.16 PM.jpeg

slater

    May 2, 2024
  • 0
  • 0

Latest topics

Top