Sandsnip3r 10+ year member
Junior Member
if the box im building is only 16.5" tall and they are 15" subs how will that work? The cut out diameter is 13 13/16"
and im looking at http://www.reaudio.com/speaker_box/LPort_Box_Calc.html
put in:
Box Width: 35
Box Height: 16.5
Box top/bottom Depth: 18
Wood Thickness: 0.75
Square Port Width: 3
Square Port Length 2: 0
it comes to 4.285 cuft and 33.62Hz
will that work for 2 Alpine SWR-1542D (15" Type R)?
it gives me 31.25 inches for the front plate, and 2 15" comes to 30" will they be touching and 15" tall box with 15" subs?
is it just a too tight of a fit?
what can i do? my Max height is maybe 16.5", my Max width is 35" i can go deeper than 18" but, it might be hard putting it into my trunk.
if the subwoofer cutout diameter is 13 13/16"
then wouldnt the front board being 15" be fine? wont it just almost overlap...?
and what will happen considering the "Port Length 2" would be gone
thanks
and im looking at http://www.reaudio.com/speaker_box/LPort_Box_Calc.html
put in:
Box Width: 35
Box Height: 16.5
Box top/bottom Depth: 18
Wood Thickness: 0.75
Square Port Width: 3
Square Port Length 2: 0
it comes to 4.285 cuft and 33.62Hz
will that work for 2 Alpine SWR-1542D (15" Type R)?
it gives me 31.25 inches for the front plate, and 2 15" comes to 30" will they be touching and 15" tall box with 15" subs?
is it just a too tight of a fit?
what can i do? my Max height is maybe 16.5", my Max width is 35" i can go deeper than 18" but, it might be hard putting it into my trunk.
if the subwoofer cutout diameter is 13 13/16"
then wouldnt the front board being 15" be fine? wont it just almost overlap...?
and what will happen considering the "Port Length 2" would be gone
thanks