box desing help.

[buster82284]

i have a mustang 2004 coupe and im trying to build a ported box for my car. i am looking to make a box for 3 type r 12 subs and all with there own port. if someone could desing a box for me that could do about 1.4cf per chamber. i would like to make it fill my trunk but not to high so like 10 high 34 wide and 34 in long if its possible. ill post a pic of my trunk and design im trying to make.

Click to read more...

 

[swimfreak26 10+ year member]

You've got PM

 

[XtrmAudioCncpts 10+ year member]

the one bad thing about mustang trunks is that the strut towers off the wheel well really screw up the amount of area you can have

 

[Beat_Dominator 5,000+ posts]

Tell me about it. His drawing there might work, You'd for sure have to do final assembly inside the trunk though.

 

[buster82284]

ok how can i go about makeing a box like this. if you can give me any info that can help me make it or if someone can design it for me that would be great. if you need more spesific dimentions i can get more.

 

[buster82284]

ok i was designing a box that will be good for my car i have the specs below taken from bassbox 6 pro. the main question i have is the with the vents i want to do 2

rectangle vents and it has an option for one flush end, two flush end, no flush ends, and the no flush end is selected cause the rest say it wont fit my box. what are flush ends? is this going got be 2 L shaped vents? and what the best fb for rap music?

Box Parts (Optimum Square Prism)

1 Top, 1 Bottom: 24.21 © x 38.25 (b) in

0.75 (thick) in

1 Front, 1 Back: 14.04 (a) x 36.75 (d) in

0.75 (thick) in

2 Sides: 14.04 (a) x 24.21 © x 0.75 (thick) in

Vent Parts

2 Tops, 2 Bottoms: 6.512 (e) x 37.49 (h) in

0.125 (thick) in

4 Sides: 6.262 (g) x 37.49 (h) x 0.125 (thick) in

 

[buster82284]

i tried the program and it doesnt seem to be working for me can someone please help me. if you can do it for me that would be great. i need a box with 4.5cf internal and its for 3 type r alpine swr-1221d subs all wired in series there doul voice coil. heres the dementions i for my car. 14 high 34 long 28 wide. i would like it ported to 33hz if someone can do this for me it will save me a headach from this dang program bb6p since i cant get it to work right.

 

[buster82284]

edited