big 3 question(pics included)

[NhustlaR 10+ year member]

dang. upgrade to 1/0 to a distro block. that's prb half the reason youre loosing voltage, youre trying to **** a golf ball through a garden hose (current wise) with 15 or so feet of 4ga.

 

[NhustlaR 10+ year member]

Stock wiring is fused...
And you don't fuse the wire to protect it from YOU drawing too much current, if your system is pulling close to what the wire is rated at, you need bigger wire. You fuse to protect the wire/equipment in case of a short.

maybe you read it wrong or I worded it wrong, that's what I was trying to say- there's no way you will draw more than the 300 with an aq1200

 

[bubbagumper6 5,000+ posts]

maybe you read it wrong or I worded it wrong, that's what I was trying to say- there's no way you will draw more than the 300 with an aq1200

You will in a dead short...I was just saying, it doesn't matter how much current you draw with your system, it has nothing to do with the fuse size...

 

[ccab 10+ year member]

dang. upgrade to 1/0 to a distro block. that's prb half the reason youre loosing voltage, youre trying to **** a golf ball through a garden hose (current wise) with 15 or so feet of 4ga.

that is very confusing..I wish someone would post some pics of their big 3 w/o the fuse stuff..i dont know what your talking about when you get into the distro block stuff

 

[NhustlaR 10+ year member]

bubba, I rarely see a car/truck which stock alt to batt+ wire is fused. (unless they run into the fuse box under the hood, but even at that 95 percent I do/ have done run from the alt along the frame right to the batt.)

 

[NhustlaR 10+ year member]

You see where your power wire to amp fuse is (close to the batt)? Well do the same thing except run the wire to the alt

 

[ccab 10+ year member]

bubba..you said a 250 amp fuse..is that ANL? mini-ANL? what?

 

[bubbagumper6 5,000+ posts]

bubba, I rarely see a car/truck which stock alt to batt+ wire is fused. (unless they run into the fuse box under the hood, but even at that 95 percent I do/ have done run from the alt along the frame right to the batt.)

Just because everyone does something doesn't make it right man. Shit can happen. Something breaks, something gets pinched, w/e...if that wire connects to ground and you haven't fused it you'll have much larger problems. The extra 15$ is nothing compared to the damage you'd be looking at if your battery exploded (not saying it would, odds could be like 1 in a million).

 

[bubbagumper6 5,000+ posts]

bubba..you said a 250 amp fuse..is that ANL? mini-ANL? what?

Well it sort of depends on what brand wire you have, I just glanced at knukonceptz's 1/0 and it's rated for 300A. However with the power your running, you would be fine with a 250A.

Oh and fuse type depends on the fuse holder...most common is regular ANL.

 

[ccab 10+ year member]

Well it sort of depends on what brand wire you have, I just glanced at knukonceptz's 1/0 and it's rated for 300A. However with the power your running, you would be fine with a 250A.
Oh and fuse type depends on the fuse holder...most common is regular ANL.

well im using knu's 4 gauge wire..but a scosche fuse/fuseholder for the main system

and for the big 3 ill just use a knu fuse holder w/ a 300A fuse.

does that sound good?

 

[bubbagumper6 5,000+ posts]

well im using knu's 4 gauge wire..but a scosche fuse/fuseholder for the main system
and for the big 3 ill just use a knu fuse holder w/ a 300A fuse.

does that sound good?

lol, fuse holder brand doesn't matter. They sell some nice fuse holders on ebay for like 14$ shipped, if your interested I can find the link.

But yeah for 4 gauge the fuse should be 150A, for 1/0 it should be 300A (or smaller)

 

[bubbagumper6 5,000+ posts]

Good fuse holder:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300336431097&ssPageName=STRK:MEWNX:IT

 

[ccab 10+ year member]

lol, fuse holder brand doesn't matter. They sell some nice fuse holders on ebay for like 14$ shipped, if your interested I can find the link.
But yeah for 4 gauge the fuse should be 150A, for 1/0 it should be 300A (or smaller)

okay..I know this may sound ridiculous but just to make sure im on the right track..and you seem like you know EXACTLY what you're doing.(and I dont)..

I am getting a h/u, dash kit, wiring harness, 8ft of 0 gauge(big 3), 2 Channel RCA cables(5M), Fuse holder w/fuse 300A, 1/2" TechFlex, and 10 1/2 inch 0 gauge eyelit terminals.

I am going to link everything im getting and you guys(mainly bubba I guess) make sure everything is right and you will be my hero! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[NhustlaR 10+ year member]

Just because everyone does something doesn't make it right man. Shit can happen. Something breaks, something gets pinched, w/e...if that wire connects to ground and you haven't fused it you'll have much larger problems. The extra 15$ is nothing compared to the damage you'd be looking at if your battery exploded (not saying it would, odds could be like 1 in a million).

no no I didnt mean it like that, I meant the factory wiring fused.

im sorry we are just on the total wrong page tonight haha

 

[bubbagumper6 5,000+ posts]

no no I didnt mean it like that, I meant the factory wiring fused.
im sorry we are just on the total wrong page tonight haha

yeah i know...it's ok //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif