exactlyno. run 1/0 non fused for your big 3
-batt to chassis
chassis to engine/trans
+batt to alt.
no fuses for teh big tree
exactlyno. run 1/0 non fused for your big 3
-batt to chassis
chassis to engine/trans
+batt to alt.
no fuses for teh big tree
Yes 2 fuse holders and 2 fuses. Put them as close to the battery as possible. Their purpose is to protect the battery in the event of a short.so I need two fuse holders..and two fuses..one for the big 3 upgrade and one for the basic system.
okay..well just to keep things non confusing for me. im going to use a fuse/fuseholder for the alt to bat and fuse/fuseholder for the main system like is shown..do I need to have the same size fuse? or what do y'all recommend?Yes 2 fuse holders and 2 fuses. Put them as close to the battery as possible. Their purpose is to protect the battery in the event of a short.
Obviously a lot of people don't use them, but that's because not many people have problems, it's the handful that do that will be lucky they spent 15$ on a fuse holder...I mean you don't HAVE to fuse your main power wire either, but if you accidentally short it, you'll be lucky you did...
What size wire are you using?okay..well just to keep things non confusing for me. im going to use a fuse/fuseholder for the alt to bat and fuse/fuseholder for the main system like is shown..do I need to have the same size fuse? or what do y'all recommend?
it just confuses me..can anyone link me some pics if their big 3 w/o fuse/fuseholder? maybe i can visualize it better that wayif installed correctly you do not need a fuse. the stock wiring isnt fused, is it? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
and besides, the wire is rated for approx 3xx amps- there is no way you will endanger overloading the 1/0 unless it is shorted.
150A for 4 gauge and 300A for 1/0. You fuse for the maximum rating on the wire. You can go smaller but never larger.im using 4 gauge for my system..ill be using 0 gauge for the big 3.
im using 4 gauge for my system..ill be using 0 gauge for the big 3.
Stock wiring is fused...if installed correctly you do not need a fuse. the stock wiring isnt fused, is it? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
and besides, the wire is rated for approx 3xx amps- there is no way you will endanger overloading the 1/0 unless it is shorted.