AQ pre production 2.5 sub

[dadydolas 10+ year member]

i also would like to run 2 15's

with 6-750 rms for fun

also more cone area and 2 vc instead of one to dissipate heat

 

[dadydolas 10+ year member]

that rms is each

also that is a great selling point for ur new amps dj

 

[dadydolas 10+ year member]

plz make us a beastly sub to fill the gap

 

[dadydolas 10+ year member]

and keep it american made

 

[perfecxionX 10+ year member]

and keep it american made

what for. i want teh cheapness

 

[IgnoreMe 5,000+ posts]

i dont like the wire they have instead of two terminals. what do you do to connect to the amp,use a soldering iron or what? I think it seems kind of inconvenient.

i thought it sucked too...until i used them. they work just dandy, and hardly inconvinient.

 

[95BlackGA 5,000+ posts]

x2 wire up your speaker wire to the woofers wires with wire nuts and I usually put electrical tap around that as well, just for extra measure. All DD and AQ subs use the wire instead of posts/terminals.
egg

I braid mine together, then heat shrink, then tape them. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I hate wire nuts, they're an expense that can be done without, and have an even better hold. //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[Pyro_By_Nature 5,000+ posts]

i dont like the wire they have instead of two terminals. what do you do to connect to the amp,use a soldering iron or what? I think it seems kind of inconvenient.

What's so hard about twisting wire together? You can twist and tape, or use a wire nut.

Much easier than trying to jam a couple decent sized wires in some terminals.

 

[2000LaDe 10+ year member]

Here is a picture of the new pre production I guess its called the AQHDC2.5 subwoofer, It looks chopped up cause I had to remove the background, I hear it has a smaller motor than the HDC3 and it has 2.5"VC. Anways heres the pic of it


egg

aww its a cute little guy

 

[vehementSPL 10+ year member]

Looks nice. I wanna some specs on the subs. Like what the rated power handling is going to be. Also is that a 10 or 12 in the pic

 

[flakko 5,000+ posts]

looka lika tc motor

 

[lilmaniac2 5,000+ posts]

This one coming from the same place the hdc is?

 

[Wkbdkid 10+ year member]

Looks sweet. I was jus gonna order 2 12s of the older ones for the chics ride. Any idea on when their going on sale an when they'll ship?

 

[DeuceLee 10+ year member]

like lilmanic said, comin from same place, the c stands for chinese, says dj himself, so no american made...

as long as the build is still good, pounds, and a lil cheaper, plz don't complain...

cus things are made in the us, does it mean its better then other places? not always, and there's plenty of examples of where that is the case...

 

[RAM_Designs 5,000+ posts]

looka lika tc motor

x2, looks like a tc9 motor to me...