AQ 1200D problem..

[BeAlLsTaR13 10+ year member]

grab the ground wire and wiggle it when you get a chance but i say 70% chance it need to be serviced..

yeah i e-mailed aq about 20mins ago, got the reply like 8 mins after, very quick lol they told me to try switching it with another set up, to see if it could be one of my sub coils going bad so when i get the chance thats what im gonna do first

 

[basscort2009 5,000+ posts]

this thread has me tuned in. i have the same EXACT problem just happen last night. and i have checked everything as well. and on the remote wire. i have it from the pos. of the front batt. to a toggle switch so i can turn the bass on and off when needed. thats how u do the remote wire so the amp dont stay on.

 

[BeAlLsTaR13 10+ year member]

switched it out to different subs, and nothing

and i dont think its my rem wire cuz my other amp is working fine so

 

[basscort2009 5,000+ posts]

so ur sub reads the right ohms?

ur amp is on and not in protect?

ur wires are secure?

ur sub is not blown?

hmmm. maybe its somthing with the rcas

 

[BeAlLsTaR13 10+ year member]

so ur sub reads the right ohms?ur amp is on and not in protect?

ur wires are secure?

ur sub is not blown?

hmmm. maybe its somthing with the rcas

i switched out the RCAs with a different pair.

 

[basscort2009 5,000+ posts]

hmmmm. well i found my problem kinda. my sub is reading 3.7 when i should be around 1.4 so i have a speaker wire loos or off somewhere. i dont know what ur issue is. wish i could help more :/

 

[BeAlLsTaR13 10+ year member]

**** rain started up again..I'll pull the subs when I get the chance and hopefully that could be the problem..really only the last thing that could be it

 

[BeAlLsTaR13 10+ year member]

Actually when I unhooked the bass knob from the amp..the wire it's self my subs hit for the second it took to take it out if that could mean anything

 

[BeAlLsTaR13 10+ year member]

Found the problem..will update when I get on my comp..on iPod ATM

 

[BeAlLsTaR13 10+ year member]

It wasn't exactly my RCA cables it was the RCA outputs..some how they loosened up and idk exactly how

 

[basscort2009 5,000+ posts]

so ur ohm load was always what it should have been right? only reason i ask is becuz i am tryin to rule that out for sure and make sure its the sub speaker wire loose

 

[Serpent710 10+ year member]

had the same problem a while back on my 2200. i took the neg off the batt and forgot to reset the settings on the headunit which = no bass lol

 

[BeAlLsTaR13 10+ year member]

Had nothing to do with my ohm load it was just that the RCA pre outs on my hu got loosened up inside of the hu.. I jiggled the rcas a bit and saw it was moving all over so I had to open the hu up and tighten it on the inside which I just got done doing now time to hook I up and see if it works