amp for pro60se

[boosted4]

im pretty much set on the BA pro60se for my front stage, about $330 from woofersetc. im looking at the sundown sax 125.2 for it. i have 2 basic questions.

1. is this amp good enough for the components? from the site if you didnt know the specs.

Rated power output

----RMS power, 4 ohm stereo

125W x 2CH

----RMS power, 2 ohm stereo

200W x 2CH

----RMS power, 4 ohm bridged

400W x 1CH

Signal to Noise Ratio >90dB

Low pass frequency crossover 50Hz ~ 5KHz

High Pass Crossover 30Hz ~ 3KHz

Variable Subsonic Filter 10Hz to 500Hz

Bass Boost 0~18dB

Variable Bass-Boost Frequency Control 35Hz to 120Hz

Frequency Response 10Hz ~ 40KHz (+/-1dB)

THD@RMS Watts

Channel Separation 75dB

Fuse Rating 20A x 3

Input Sensitivity Variable 200mV~6V (+/- 5%)

Dimensions 252(W) x 58(H) x 340(L)mm

2. when i hook the amp up, should it be tweeters on 1 channel and drivers on the other? or 1 side 1 channel? idk if it makes a diff. either way

thanks in advance for help... extra thanks for the most helpful response //content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

Click to read more...

 

[boosted4]

oh yeah and hello everyone lol

 

[SplAffair 10+ year member]

link?

im too lazy top search

 

[boosted4]

link for the amp? http://www.sundownaudio.com/index.php/products/amplifiers/sax-1252.html

heres the component set specs, theyre 3 ohm, thats why im confused

http://www.woofersetc.com/p7526/PRO60SE--Boston-Acoustics-65"-2way-PRO-Series-Component-System.htm

 

[boosted4]

Bump

 

[DarkScorpion 10+ year member]

Left channel will go to left crossover which goes to left tweeter and left woofer, and right channel will go to right crossover which goes to right tweeter and right woofer. Don't worry about the ohm rating, the SAX125.2 will power 3 ohm fine. The power will be about 160watts/channel.

Edit: At $300 for component speakers, why not take a look at other, less mainstream brands? The DLS UP6i's are great, and so are the Image Dynamics CXS64 V.2's.

 

[Eugenics 5,000+ posts]

pro60s are good, but they loooooove power

 

[boosted4]

Left channel will go to left crossover which goes to left tweeter and left woofer, and right channel will go to right crossover which goes to right tweeter and right woofer. Don't worry about the ohm rating, the SAX125.2 will power 3 ohm fine. The power will be about 160watts/channel.

Edit: At $300 for component speakers, why not take a look at other, less mainstream brands? The DLS UP6i's are great, and so are the Image Dynamics CXS64 V.2's.

i figured those would be a solid choice, i dont know much about car audio so im still open to suggestion as far as a component set goes. my price range is 3-400. i just dont want the tweets to be piercing... warm but loud i guess. i listen to mostly hip hop, r&b occasional rock but nothing too heavy. ive looked into the id's a bit and there seems to be alot of people on hear who like them.

mainstream, underground whatever, i dont care about names, just what sounds good for the money im spending