American Bass XFL 15's D4 (new models)

[MrAcd 10+ year member]

Looking to buy some AB XFL 15's daul 4 ohm, looking for the new model though with the new 220oz magnet and direct tinsel leads. Throw some offers my way!

Click to read more...

 

[Savackz]

i think i asked him about my design too and he said mine was good. with that amp, i wonder why he suggested so big , maybe he can chime in. I would defiently take his word over mine he has far more experience and the same subs haha i had always built my boxs with around 14 sq inches but people started telling me to raise it to 15 because 14 was to small.

I don't know then, hopefully he is doing it soon. Because I don't need to mess this up.

 

[Papermaker85 5,000+ posts]

I just had the 10's , i liked them, very nice quality woofer. The one thing i didnt like was that they have tinsel slap...no stitched tinsels, that led me to sell them.

easy fix. felt pad on the cone

 

[Savackz]

i think i asked him about my design too and he said mine was good. with that amp, i wonder why he suggested so big , maybe he can chime in. I would defiently take his word over mine he has far more experience and the same subs haha i had always built my boxs with around 14 sq inches but people started telling me to raise it to 15 because 14 was to small.

Clear your pm's

 

[MrAcd 10+ year member]

Clear your pm's

thanks, im good now

 

[MrAcd 10+ year member]

easy fix. felt pad on the cone

it had some already on there.. one fell off but denim sent me another one, it helped that one but still continued on both

 

[Papermaker85 5,000+ posts]

if your interested i have a HDC3 motor with a custom recone, 200+ shipping.. dual 1ohm just played with 300 watts to conform it works fine..

 

[MrAcd 10+ year member]

if your interested i have a HDC3 motor with a custom recone, 200+ shipping.. dual 1ohm just played with 300 watts to conform it works fine..

really? who did you get the recone from to make it custom? and will it take more power now?

 

[Papermaker85 5,000+ posts]

really? who did you get the recone from to make it custom? and will it take more power now?

Yes and no

i told psi what i wanted. they put the cones surround and spiders on the former/coil and i just aligned the coil and glued the spiders and surrounds down.. its going to handle a-bit less mechanically and a bit more terminally over the regular copper coil(base model) i re-coned it because i really hated the dry sound from the mechanical distortion. i intended on putting it in a 3.5 tuned to 32 hz box for a more musical alignment. as id recommend something similar unless you want a peaky woofer that is just loud as **** around tuning..

 

[MrAcd 10+ year member]

Yes and no
i told psi what i wanted. they put the cones surround and spiders on the former/coil and i just aligned the coil and glued the spiders and surrounds down.. its going to handle a-bit less mechanically and a bit more terminally over the regular copper coil(base model) i re-coned it because i really hated the dry sound from the mechanical distortion. i intended on putting it in a 3.5 tuned to 32 hz box for a more musical alignment. as id recommend something similar unless you want a peaky woofer that is just loud as **** around tuning..

I will pass, i just saw you list it. And bump, anybody got any XFL's?

 

[Papermaker85 5,000+ posts]

I will pass, i just saw you list it. And bump, anybody got any XFL's?

hehe. good luck bro. hope you find something you like..

 

[MrAcd 10+ year member]

Just ended up ordering them new for $360.