Alpine Type R

[jj4475 10+ year member]

u got the video of that?

 

[nVRuckus 5,000+ posts]

get a type R, just put atleast 400 watts rms to it and port it with a bigger than specs box like 2.5 cuft tuned to 32hz or a sealed of like 1.5cuft

 

[AndonD454 10+ year member]

i have a type e right now.. had 2 type Rs,

the single type e 12 is loud for as cheap as you can find them.. theyll take 300 rms or so without problems.. the sq isnt as good as the type r.. but mine is ported, so sealed you could probably have some better sq

 

[cleanerupper 10+ year member]

How much money do yo have to spend all together on the sub and amp?

Also, you know that wiring a dual 4 ohm subwoofer, such as the tyep R in parallel will give a 2 ohm load to the amp, right? That would give your tyep R 600W RMS to play with on the MRD-M605. A dual 4 ohm sub cannot be wired to 4 ohms, only 2 and 8.

 

[nVRuckus 5,000+ posts]

How much money do yo have to spend all together on the sub and amp?
Also, you know that wiring a dual 4 ohm subwoofer, such as the tyep R in parallel will give a 2 ohm load to the amp, right? That would give your tyep R 600W RMS to play with on the MRD-M605. A dual 4 ohm sub cannot be wired to 4 ohms, only 2 and 8.

you know they make dual 2 type Rs right? he can wire them into 4ohms //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[shaneyoung82 10+ year member]

I would like to spend around $300. I would get 1 sub and 1 amp on ebay.

 

[nVRuckus 5,000+ posts]

get a type arrrr and a profile amp you will have some change //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[nVRuckus 5,000+ posts]

http://cgi.ebay.com/PROFILE-California-AP1200-1200W-2-CH-Amp-with-Bass-Leve_W0QQitemZ270024739103QQihZ017QQcategoryZ18796QQrdZ1QQcmdZViewItem

600watts @ 4 ohms

then get a 1222d and wire it to 4ohms your golden