92' civic. door speaker question.

[cj407]

ex is the type....eg is the model.....ef is 88-91....eg is 92-95....and ek is 96-00....

 

[oldschool4me 10+ year member]

my mounting diameter of the momo's are 5-5/8" and about 2.75" mounting depth

 

[oldschool4me 10+ year member]

ex is the type....eg is the model.....ef is 88-91....eg is 92-95....and ek is 96-00....

ok gotcha

 

[cj407]

so if the momo's are that big then how are you having a problem.....

 

[cj407]

just cut away all the plastic that doesnt fit on the door.....so everything that isnt flat....and they should fit....unless hell is freezing over....is the ground cold?

 

[oldschool4me 10+ year member]

so if the momo's are that big then how are you having a problem.....

well if i cut out more to get the speaker to fit the speaker lip will over hang the plastic piece and wont leave me anything to screw into.

 

[oldschool4me 10+ year member]

oh and i dont have a dremmel to cut these out with either. i just used a drywall saw to trim some but would need something more efficient to cut that much away.

 

[oldschool4me 10+ year member]

http://cgi.ebay.com/Polk-Audio-MOMO-MM6-6.5%22-CAR-COMPONENT-SPEAKERS-MMC6500_W0QQitemZ290305156604QQcmdZViewItemQQimsxZ20090324?IMSfp=TL090324125005r29727

these are what i have.

 

[cj407]

why dont you just bring it to someone who knows what they are doing and have the proper tools...i could have the job done in 15 minutes max....shops only charge ~25-35 for installation of speakers.....just pay the money.

 

[cj407]

Driver Mounting Depth

Top Mount 2-11/16" (6.83cm)

Bottom Mount 2-13/16" (7.14cm)

Grille

Height 9/16" (1.43cm)

Diameter 6-5/8" (16.83cm)

Cut-out

Driver Cut-out Diameter 5-1/16" (12.86cm)

those are the dimensions of the midbass for you.....

 

[oldschool4me 10+ year member]

would the 3/4 mdf ring not work for me then?