880 prs CROSSOVER POINTS

[Urmama 10+ year member]

How low can I crossover the tweeters on the 880 PRS while running 3 way active?

Click to read more...

 

[Jeremy M 10+ year member]

i believe it goes down to 3kz

 

[Urmama 10+ year member]

Probably not low enough to use with my RS 180's?

 

[Jeremy M 10+ year member]

what does ur RS 180's want to be xovered at?

 

[Urmama 10+ year member]

http://www.parts-express.com/pdf/295-374g.pdf

2K active would be doable

Wouldn't you want the tweeters to get more of the spectrum in car audio to help raise the sound stage?

 

[Jeremy M 10+ year member]

i thought u can raise the sound stage by good tweeter placement?

 

[Trey803 5,000+ posts]

you need to switch to network mode by flipping the switch either on the back or the side of the deck

 

[Urmama 10+ year member]

i thought u can raise the sound stage by good tweeter placement?

well yeah, but that tweeter crossover point will do wonders. A tweeter covering from 2k up sounds like it's playing full range.

 

[tcguy85 10+ year member]

the 880 will let you cross them lower than you'll ever need. you can go as low as 1.25k.

page 60 if you want to read for yourself.

http://www.pioneerelectronics.com/StaticFiles/PUSA/Files/DEH-P800PRS_OperationManual12010.pdf

 

[Flipx99 5,000+ posts]

I wouldn't cross a tweeter much below 3k. Gaps running active are acceptible.

 

[Urmama 10+ year member]

the 880 will let you cross them lower than you'll ever need. you can go as low as 1.25k.
page 60 if you want to read for yourself.

http://www.pioneerelectronics.com/StaticFiles/PUSA/Files/DEH-P800PRS_OperationManual12010.pdf

Thanks, I had a hard time tracking that down on their website. Looks like I'll be getting an 880 afterall