6TH Order Bandpass for HDC315-A Coming SOON!

[Fuknmovin 10+ year member]

Tha'ts what I'm doing, I got 50' of 1/0 on its way and an alter rebuild kit for 240 amps coming too.

 

[tez4life Premium Member]

I would imagine a regular slot/aero ported box should get over a 140 with that sub and that power...but then again you're electrical is not up to par like you stated earlier. I would concentrate on upgrading that first before you change your enclosure, especially if you're liking how this one sounds.

I def agree with this, seems to be whats holding you back a little bit. A stronger electrical will more than likely be a noticeable difference in your current box. I would do that first before considering another enclosure.

Box is badass for sure though, its def different.

 

[Fuknmovin 10+ year member]

Thanks!

 

[bigbangtheory 5,000+ posts]

Well I laid the box down with the ports toward the drivers side now and it did a bit better, got a 140.4 on music this time and still no 45's I think it will just take some doing to get this truck loud but I think its do-able. As for Old school, I think I am pretty on par then to your setup as I am still working out the bugs and with about half the power and half the cone area I am almost 10 DB behind you...I think that's about right don't you? remember I have not taken the whole seat out or anything, and still need an alternator....Not to mention I only have a 4 gauge wire charging my batt for the amp too! It sucks it dry in about 15 seconds at max volume! LOL! Only a 1000CA batt too. I hope to get about 1 DB from the 45's hopefully and then I want to try a half piece of 3" PVC laid on top of the box to promote airflow up and out into the cab like I have seen a bunch of people do in the SUV's. Does anyone here have experience with this exact truck getting loud? I have been told it is very hard to get the crew cabs loud but I want to see what others have to say...

Well I am doing 145.1 at the dash sealed on the TL. I am running two older Pioneer w-250spl 10's in a smallish 2.0cft box @35 off a 2608d Hifonics amp at 2-ohms, which is doing 1700rms, with my electrical I might be seeing 1500rms out of it. Running all Knu 0g wire, Redtop up front and powermaster 5100d in back with no big3 as of yet.

You should be doing at least those numbers if not better IMO. Something seems wrong. Mine is in a trunk and still factory very small altenator too boot.

 

[azbass 5,000+ posts]

pics of the actual install?

 

[Fuknmovin 10+ year member]

Will get some today...

 

[azbass 5,000+ posts]

and?

 

[Fuknmovin 10+ year member]

wife's been keeping me busy, I will get them right now, its really ugly right now as its in the testing stage only so no need to bash! LOL!

 

[Fuknmovin 10+ year member]

Here is the box and the amp I used the 6X9's are for the desert when I am "entertaining" in Glamis @ Olds Hill.

 

[KyleBechtold 5,000+ posts]

have you tried outlaw? windows down.. door(s) open

 

[thehardknoxlife 10+ year member]

I'm willing to bet those strips you have to seal the top is playing a part in your score. I remember with my first 6th order, I had the same problem and used the same stuff you have. Took the strips out and used some silicone instead and viola. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

 

[Fuknmovin 10+ year member]

Really....I might have to try something like that, I did finally get the power to the thing with the 1/0, 2 runs of that to the front and back battery and 2 jumpers between the two batts up front. I still need the ALt. but this helped immensely, no way to test it right now but it got louder for sure and shakes the truck more. If I had to guess, at least a DB, so its moving in the right direction. I am considering a blow through right now though, getting sick of the HUGE box in the back seat!

 

[Crzy 10+ year member]

what is the overall outer dimensions of the box? read through but didnt see any mention of it

 

[Fuknmovin 10+ year member]

33x33....