hemi4me? 10+ year member
Senior VIP Member
I started a thread a while ago about suggestions for trimming off and building a rear deck infinite baffle. Well, yesterday the trim was thought up, and put together by Chad from Xtreme Audio and Design. The pics do not do it justice... The speaker aluminum trim rings are not brushed or cleared yet, but the center aluminum piece is done...
The rear deck fits like the factory part, because it is the factory piece. I made a mistake early in the build by cutting the trim piece when I should have just left it alone. A new one was over $300.00 and a month out so we built up a new center for the one I had. The aluminum pieces were thought up to give it a lil something to offset the ultra suede and also serve to hold the rear beauty paned to the baffle.
Next will be adding the amp rack (when I decide on a amp) and front stage as well.
The rear deck fits like the factory part, because it is the factory piece. I made a mistake early in the build by cutting the trim piece when I should have just left it alone. A new one was over $300.00 and a month out so we built up a new center for the one I had. The aluminum pieces were thought up to give it a lil something to offset the ultra suede and also serve to hold the rear beauty paned to the baffle.
Next will be adding the amp rack (when I decide on a amp) and front stage as well.