300C Install *WorkLog* Troy_Audi0

[hollowpoint 10+ year member]

Nice work. I liking that rear view cam you got going on

 

[Fattony911 10+ year member]

i did an install in a 300 with 2 12" r's off a pa3000 it was rediculously loud for a daily

 

[Skip01 5,000+ posts]

comeon....MOREE!!!!!

 

[troy_audi0 10+ year member]

OK great!.. now back to mt install again..

Finishing up the Box & Trunk

 

[patrick1202 10+ year member]

more more

 

[troy_audi0 10+ year member]

what do you think of this?

Suede Flock on the door trim..

1st time

 

[Rawr-DQ 10+ year member]

I really liked the laser/aiming for the tweets, I'm going to try that...soon.

 

[troy_audi0 10+ year member]

This kit said 15-18hrs it was still tacky after about 16hrs..

so we waited about 20..

it cameout a bit stiffer than seude.. but looks real nice..

Here are some new pix.. Starting the glass work this weekend..

Flock On The B pillers

A-Pillers & Tweeter pods

The Box

Grill Cloth On The Back Side Of The Rings..

(Just Glued To See How It Would Look)

Mocked up.. Just kinda Pulled into place..

 

[CaliforniabOY5 10+ year member]

mmmmmmmmmm

 

[Josh #44 10+ year member]

Wow. Kudos, man...can't wait to see this thing finished. Love the suede.

 

[ngsm13 5,000+ posts]

You work at a shop... and it's SERIOUSLY taking your shop this long to finish.

That's my only criticism... maybe you have a patient customer...

nG

 

[troy_audi0 10+ year member]

You work at a shop... and it's SERIOUSLY taking your shop this long to finish.
That's my only criticism... maybe you have a patient customer...

nG

Lil of both..

It was not on the "The Main Install" kinda on the side I guess..

The Owner is very Patient..

Good friend of the shop..

Thanks troy

 

[ngsm13 5,000+ posts]

Because the correct way to do it is Loom and secure the wires every foot or so with self tapping screws. I have a crap load of signal and speaker cables ran through out my truck. Everyone of them loomed/heatshrinked and secured every foot or so. And My truck doesnt look like swiss cheese. I would feel much better knowing my cables arent going anywhere...especially in a year or so when that duct tape loses its adhesion.
anyway who cares...to each their own.

Lil of both..It was not on the "The Main Install" kinda on the side I guess..

The Owner is very Patient..

Good friend of the shop..

Thanks troy

Ah, I gotcha... we have a few of those around our shop too...

nG

 

[troy_audi0 10+ year member]

Oh I think you guys wanted to see this part..

the box biuld & the Custom Ash Tray..

lets start with the box.. I will be working on it alil more..

it was designed to be ported thru the rear deck but then Nathen wanted it sealed.. & then Aaron wanted it ported thru the front so my design had to be modded..

 

[troy_audi0 10+ year member]

Now The Custom Ash Tray..

Bert Came To The Shop To Do More Custom & To Learn a Bit More On Car Audio.. So I Told Him To Start With The Ash Tray..

It will Hold The Singer Blue LED Volt Meter & PPi Bass Nob

The Plexi will be tinited Black & The Pocket Will Be Glassed & Flocked

More Pix Lart But Its Looking Good..