2017 F-150 Crewcab options

[SLAB153]

Yes... it's needed
What amp/loading?

I’ll be using a Orion xtr 2500.1@1 ohm, or taramps 1600@1ohm

Sent from my iPhone using Tapatalk

 

[shredder2]

Gonna stretch out dem 10's huh?.. what tune are you looking for?.. Decaf, low daily, daily, rock or SPL?

 

[SLAB153]

Lol, just rather have it n not need it than need it n not have it. I’d probably do 1/2 the power daily. I know it won’t be like the dual sa12s tuned at 32 on my Orion 2500. But if I can get close enough then I’ll be satisfied. Daily, rap

Sent from my iPhone using Tapatalk

 

[shredder2]

Are you wanting to build your own and get that 2" seatlift?.. it's a 31.3 hz tune btw

 

[SLAB153]

Are you wanting to build your own and get that 2" seatlift?.. it's a 31.3 hz tune btw

Yes

Sent from my iPhone using Tapatalk

 

[shredder2]

Does that truck have 9" at the front of the backseat underneath... and 14" depth with 8" height at that point?... it's 56' wide IIRC.. correct?

 

[SLAB153]

Hmm well I got 8” front 13” depth with 6” rear n 54” wide. Those are close. I took it with carpet still in place, I can measure again n see if I get that.

Sent from my iPhone using Tapatalk

 

[shredder2]

Be sure... lol... it might be different and it'll stick out if it is, you don't want that!

 

[SLAB153]

Ok I’ll remeasure in a hour, also it ***** the lift kit is $163 with shipping and 1 sa10 is $160. If a dr would increase the penile length by 2” for that price there’d be a 5 year waiting list smh.

Sent from my iPhone using Tapatalk

 

[shredder2]

Op in the other thread fabbed his and said it was easy... used box tubing and longer bolts I think... you'll have to look at it... lol

 

[SLAB153]

I was able to get 8 3/4” in front pressing down on the carpet a bit, 13” depth with 6” rear height, 56” wide

Sent from my iPhone using Tapatalk

 

[shredder2]

So it'll work?... you tell me... the other guy posted pics of how it fit... check em out

He said that with the 2" lift it slid right in and fit well... 8.75"?.. huh... sounds like 9" to me

http://www.caraudio.com/forums/subwoofers/635170-my-dual-sundown-sa-10-ported-box-build.html

 

[bandit_kb]

Hmm well I got 8” front 13” depth with 6” rear n 54” wide. Those are close. I took it with carpet still in place, I can measure again n see if I get that.

Sent from my iPhone using Tapatalk

That’s accurate.

Sent from my iPhone using Tapatalk

 

[Popwarhomie 5,000+ posts]

I’ll be using a Orion xtr 2500.1@1 ohm, or taramps 1600@1ohm

Sent from my iPhone using Tapatalk

I have a Taramps DSP3k for sale. 2 hours of play time. Cheap. PM me if interested.

 

[shredder2]

Is there any foam under the carpet that might compress with the seat down?.. I was told it fit well... it was 11" in front, 8" in back 56" wide...

I raked the baffle slightly so it would fit under the seat lip better... magnet clears and it goes low and loud according to him... he had a CAB at 1/2 ohm on it so I ported it for +2000 watts