2007 Tahoe Build

[andrew2944r 10+ year member]

Finished product for the 1st try. I did not dig the grilles at all so tore them apart and rebuilt.

 

---------- Post added at 11:28 AM ---------- Previous post was at 11:27 AM ----------

 

Decided to change the A Pillars up a bit, here is the final results. Also working on the door panels.

 

[andrew2944r 10+ year member]

So got one panel ready today to be wrapped. Talk about alot of sanding, took me all day for this one panel.

 

---------- Post added at 11:31 AM ---------- Previous post was at 11:30 AM ----------

 

Got me some goodies today! Thanks again Toolmaker!!

 

---------- Post added at 11:32 AM ---------- Previous post was at 11:31 AM ----------

 

Final drive door finished, should have the passenger finished up tomorrow.

 

[andrew2944r 10+ year member]

Got around to getting the Ipad installed in the Tahoe. All that is left is some finishing sanding and have it hydro dipped to match the rest of the wood trim.

 

[andrew2944r 10+ year member]

Tons of sanding to make this thing next to perfect.

 

---------- Post added at 11:35 AM ---------- Previous post was at 11:35 AM ----------

 

Everything is at Liquid Print being hydro dipped. Just waiting on the Arc PS8,

Sundown 125.4's and the Shok Subs. Will start on the box as soon as I get some proper T/S parameters for the subs.

 

[andrew2944r 10+ year member]

Decided to get fancy with the wiring just for that clean look and should add a bit of protection to the wire, black looms were just kind of meh.

Still waiting for subs to show up and will start the box once they get here.

 

[andrew2944r 10+ year member]

Here is a few more pictures of some of the final touches before we get started on the box. All parts are back from HydroPrint and turned out very nice!

 

[quackhead 10+ year member]

good Lord...

 

[myjaja 10+ year member]

Nice man! One of the cleanest installs I have seen so far recently.

 

[Dtrom 10+ year member]

This is gonna be nice.

 

[Boomsday 10+ year member]

Makes me want a bigger dash //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Jerhemy 10+ year member]

This build is amazing man, great work!

 

[lunchmeat 10+ year member]

MMMM Daddy like.

 

[winkychevelle 10+ year member]

How are the batts secured I didn't thing the factory hold down would work with no lip on the bottom of the batt

 

[BoomBoxStereo 10+ year member]

how do you get to the iPad home button?

 

[andrew2944r 10+ year member]

how do you get to the iPad home button?

You don't it stays on while I am in the vehicle and gets pulled out when I get out. If I feel I ever need a button I can add a push button on a spring pretty easy. The top of the trim panel is held on my neo magnets and the bottom retained the factory clips so It is very easy to take it in and out. Also the Ipad uses this for charging and connection to the 80PRS. Composite A/V Cables for Mobile Video Systems