2 subs, 1 amp
- Thread starter dallas101346
- Start date
- Replies 2
- Views 471
-
3Participant count
-
Participant list
kingpin_jeffie 10+ year member
i need a vacation...
yes you can hook them up in parallel or in series
it depends on the impedance of your subs and what your amp is stable down to
it depends on the impedance of your subs and what your amp is stable down to
Activity
No one is currently typing a reply...
Similar threads
You said the subs are dual 4 ohm. Keep in mind that this means you have to wire them in series/parallel which will give you 4 ohms.
Yes, the amp...
- Started by ScootyBoomBoom
- Amplifiers
No not in this situation.PM sent for proper use of the Y splitters for this situation
- Started by Mission Shane
- Wiring, Electrical & Installation 2 3
I recommend wiring to the 2 ohm load on the amp you stated you have, or you can wire to an 8 ohm load for amp stability. You can wire one sub to...
- Started by brice15s
- Amplifiers
https://www.the12volt.com/caraudio/subwoofer-wiring-diagrams.asp?Q=2&I=41
- Started by Tiptopss
- General Car Audio 2
About this thread
New threads
-
-
-
-
-
Fuse Taps at 30amp with 16AWG....- Started by Paul Curtis
- Replies: 11