2 questions. 2002 FORD EXPLORER

[nickolas_j_t 10+ year member]

Would that be a good ground?

or would this one be better?

Where do I go from here? How do I get the panels off?

different picture, same question.

I want to run Kicker 1/0 wire underneath my carpet as well as 16 gauge to my doors for the stuff in my sig.

Thanks for the help, more questions to come.

Click to read more...

 

[Skip01 5,000+ posts]

Pops off same as other one.

I used my rear seat bolt...not the best but you can use it.

 

[hornedfrog1985 5,000+ posts]

hi

 

[nickolas_j_t 10+ year member]

I mean how do you get the main panels off? You need to get them off to get wire under the carpet I believe.

 

[nickolas_j_t 10+ year member]

hi

whad up

 

[nickolas_j_t 10+ year member]

Pops off same as other one.
I used my rear seat bolt...not the best but you can use it.

yea dude I'm usin that as my ground, I just checked it and its a perfect fit for my ground wire cable.

 

[hornedfrog1985 5,000+ posts]

Just sand it really well.

 

[Skip01 5,000+ posts]

Just give it a lil pull...it pops off with clips

And you used the seat bolt huh?

Not that plastic thing?

 

[nickolas_j_t 10+ year member]

I am going to use the seat bolt. So the side panels have clips on them too? The seat belt is screwed into where I need to pull off with these clips...

 

[nickolas_j_t 10+ year member]

Do you guys think that 1/0 will fit under the carpet?

 

[Skip01 5,000+ posts]

Do you guys think that 1/0 will fit under the carpet?

Yeh it will....mazzasec ran 4 under his carpet.

Are you coming in through the firewall by the pedals?

Yeh its just clips on the side.

 

[Louisiana_CRX 5,000+ posts]

i went to the frame in my old ex

 

[nickolas_j_t 10+ year member]

i went to the frame in my old ex

I would, but I'm going to have a tough enough time the way it is.

 

[nickolas_j_t 10+ year member]

Are you coming in through the firewall by the pedals?

I don't know yet. Where do you think the best place would be?

 

[roarzorz 10+ year member]

You shouldn't need to take the side panels all the way out. Just pull them loose enough at the bottom to squeeze the wire through.