SOLD 2 Hifonics amps f/s - BXI 2608D (2500 RMS) and XX-Zues (1600 RMS) Cheap!! Nice!!!

martiandancer31
10+ year member

Front Towards Enemy
For sale today are two hifonics class-d subwoofer amps - one is 1600 RMS at 1 ohm, the other is 2500 watts rms @ 1 ohm:

Hifonics Brutus BXI 2608D - 2600 RMS @ 1 ohm

I am the second owner of this amplifier. According to the previous owner, he only used it once, to test a sub. When I got the amp, I used it in my trunk to power a 15" tc3000. I never really pushed it, as my system was(is) more designed for SQ than SPL.

This amp easily wires up with 0 gauge and up power wire, and has many useful features, such as a high pass filter, low pass filter, bass boost, etc.

This amp functions 100% and doesn't look too bad. The HIFONICS logo lights up blue and some blue LED's point across the amp.

$225 + $20 shipping OBO

Pics:

IMG_1102.jpg


IMG_1103.jpg


IMG_1105.jpg


Hifonics XX-Zues - 1600 RMS @ 1 ohm

I purchased this amplifier last summer and never used it. I have hooked it up and tested it, that's it. It seems to make a slight "whoosh" when hooked up to your sub, if you stick your face in the sub you will hear it. It does power up and play music, however that was all I did with it.

This is a great amp for SQ, as it has a bass boost with adjustable frequency. Thus, for you guys out there looking for flat response, this could really help. Also, for an SPL-type, it allows you to raise the boost frequency to whatever you want instead of locking you in to 45 Hz. It also has high pass and low pass filters. This amp will easily accept 0 gauge and up power wire and 8 gauge and up speaker wire.

Looks-wise, its not too bad either. The hifonics logo lights up red when powered up.

$150 + 20 shipping OBO

Pics:

IMG_1098.jpg


IMG_1101.jpg


IMG_1100.jpg


IMG_1099.jpg


Offer UP!! PLEASE POST AND PM ME!!! PM'S ARE FASTEST!!

Note: Shipping will be whatever the cheapest USPS has, and if you want insurance, you pay for it. Also, while these amps are sold AS-IS, they are guaranteed to arrive on your doorstep in the pictured and stated condition.

If you would like ref's talk to cianzo on here, i've dealt with him several times in the past.

 
I could use that brutus //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Wow, Great prices! Trades?????
not really looking for trades, I just had to pay a boatload of money unexpectedly to make my car pass inspection and I need to recoop some of that //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I could use that brutus //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
you most definitely could. PM'd you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yep, at the amplifiers. I get the same 14.7 volt reading when they cutoff too.
12
1K
Pull it and test it at the battery post. Simple Power up test to verify if it powers up fine out of protect mode. if it does then Id be checking...
3
1K
I have a Gemeni VII, Heucules VII, Pluto VII, and a Vulcan VII left out of a massive slew of VII and VIII series. They still work Excellent...
5
3K
  • Locked
COMPLETED Hifonics Plato III
Yes, they are painted. The cover is very easy to take off and repaint to whatever color of choice to match the install.
2
1K
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
332

About this thread

martiandancer31

10+ year member
Front Towards Enemy
Thread starter
martiandancer31
Joined
Location
Los Angeles, CA
Start date
Participants
Who Replied
Replies
48
Views
8,561
Last reply date
Last reply from
ddureka
Image 5-2-24 at 8.16 PM (1).jpeg

slater

    May 2, 2024
  • 0
  • 0
Image 5-2-24 at 8.16 PM.jpeg

slater

    May 2, 2024
  • 0
  • 0

Latest topics

Top