One Elemental Designs 19ov.2 for trade, used gently off of about 600 watts.
this would be a fun/cheap ht sub, its a d4
comes with mounting gasket, and I will build a shipping box for it out of 3/4" plywood and 2x4"s
Im wanting a processor..
an audio control, maybe a used pioneer 880prs as well, something I can use to run a 3 way active front stage
I may be able to squeeze some cash into it, but looking for s straight trade
let me know if you have anything good for me
Im flexible on time frames.. i dont need the processor at this second, and Im only using one of the two subs atm anyways
also interested in motors for big subs
mt, 05 xxx, dd 9500, 3500, 4hps, 3 hps, some tc9 motors etc, you can tell what Im interested in
or parts to build a big 18"er will work as well
basically, I need either a processor or a big sub motor
I also have an older hifonics nemesis.. Im unsure of its mechanical condition (I havent used it in some time, Ill check this weekend) and there is some boot polish that was spilled on it before I got it) that is available as well, its rated @ 600@ 2ohms, or 150x2 @ 4ohms
I also have a rockford crunch 12" p1 with the poly lookin cone available in a small sub zero box (I found it in the shop, dont know where it came from or how old it is, but it does function)
Im wanting a processor..
an audio control, maybe a used pioneer 880prs as well, something I can use to run a 3 way active front stage
I may be able to squeeze some cash into it, but looking for s straight trade
let me know if you have anything good for me
Im flexible on time frames.. i dont need the processor at this second, and Im only using one of the two subs atm anyways
also interested in motors for big subs
mt, 05 xxx, dd 9500, 3500, 4hps, 3 hps, some tc9 motors etc, you can tell what Im interested in
or parts to build a big 18"er will work as well
basically, I need either a processor or a big sub motor
I will update with pics and the info on the nemesis this weekend @ some point, let me know if anyone is interested
