12" Exile Subwoofer in a box.
I believe it's a XPE12
500RMS/1000Peak
4 OHM, 2.5" SVC
--- $80+fees
TMA (by JL) T360.2 Amplifier
* Two-Channel Full-Range Amplifier
* Rated Power 14.5 V: 110W x 2 @ 4 ohm
* Rated Power 14.5 V: 180W x 2 @ 2 ohm
* Rated Power 14.5 V (Bridged): 360W x 1 @ 4 ohm
* Linear MOSFET Design
* High and Low Level Inputs
* Inputs: One Stereo Pair (RCA Low-Level or Multi-Pin High-Level)
* Input Sensitivity : Low-Level 200mV - 4V
* High-Level 2V - 10V
* Preamp Output : Pass-through type with unity gain
* Amplifier Filter: 12dB/octave High-Pass or Low-Pass with continuously variable cutoff frequency selection from 50 Hz - 500 Hz
* Variable EQ-Bass Boost: 0 - +9dB @ 45 Hz
* Frequency Response: 10 Hz - 35 kHz +/- 0.5 dB
* Bandwidth: 11.25" x 9.69" x 1.93"
* Dimensions (L x W x H): 11.25" x 9.69" x 1.93"
* A JL Audio Company
--- $50 + fees
For both, $120+fees
PM/Post offers. PMs preferred.
Offer up, then I'll give you a shipping quote in which you'll pay.
I believe it's a XPE12
500RMS/1000Peak
4 OHM, 2.5" SVC
--- $80+fees
TMA (by JL) T360.2 Amplifier
* Two-Channel Full-Range Amplifier
* Rated Power 14.5 V: 110W x 2 @ 4 ohm
* Rated Power 14.5 V: 180W x 2 @ 2 ohm
* Rated Power 14.5 V (Bridged): 360W x 1 @ 4 ohm
* Linear MOSFET Design
* High and Low Level Inputs
* Inputs: One Stereo Pair (RCA Low-Level or Multi-Pin High-Level)
* Input Sensitivity : Low-Level 200mV - 4V
* High-Level 2V - 10V
* Preamp Output : Pass-through type with unity gain
* Amplifier Filter: 12dB/octave High-Pass or Low-Pass with continuously variable cutoff frequency selection from 50 Hz - 500 Hz
* Variable EQ-Bass Boost: 0 - +9dB @ 45 Hz
* Frequency Response: 10 Hz - 35 kHz +/- 0.5 dB
* Bandwidth: 11.25" x 9.69" x 1.93"
* Dimensions (L x W x H): 11.25" x 9.69" x 1.93"
* A JL Audio Company
--- $50 + fees
For both, $120+fees
PM/Post offers. PMs preferred.
Offer up, then I'll give you a shipping quote in which you'll pay.
