12" SQ sub in approx .6cu sealed enclosure?

[coyote_5 10+ year member]

Any suggestions? I'm finishing a wheelwell enclosure that won't be a whole lot more than .6cu (it might get up to .7) Anyway, are there any 12" subs that will work well in that size?

Otherwise I'm strongly considering a 10" titanic or aurasound NS10-513. Any opinions on one vs. the other? I've heard good things SQwise about both.

Click to read more...

 

[bjayjr5679 10+ year member]

IDQ 12 v2

 

[chunky cumz 10+ year member]

meh,,, tear everything out and put 4 12" in the car

 

[rollerdj 10+ year member]

have a Oz ME10.2 for sale that would be sweet on a sealed box that size.

 

[rod_b 10+ year member]

How much mounting depth? G5?

 

[mcsoul 10+ year member]

That's .7 before sub displacement?

 

[BLD 25 10+ year member]

meh,,, tear everything out and put 4 12" in the car

why even post this??

look into a used DIYMA 12 or Dayton HO 12.

you would probably be better off looking for a nice 10 that can work in a small ported box. A dayton HO 10 can work in a box as small as .6 cubes ported, but you would have to do an external port to save space. Good luck.

 

[buggsson 10+ year member]

Carpower Sonic-12 is supposed to work from 0.7 and up.

 

[Slammed 5,000+ posts]

Im going to use an RE SR12 in a 0.7 box (after disp)

...I'll let you know how it sounds //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[rc10mike 10+ year member]

How about a Critical Mass UL12?

 

[coyote_5 10+ year member]

How much mounting depth? G5?

I probably can do up to 6.5 - 6.75" but motor diameter may also be an issue.

That's .7 before sub displacement?

Yes

why even post this??
look into a used DIYMA 12 or Dayton HO 12.

you would probably be better off looking for a nice 10 that can work in a small ported box. A dayton HO 10 can work in a box as small as .6 cubes ported, but you would have to do an external port to save space. Good luck.

Thx. Ported isn't an option. the only exposed part of the enclosure is the face and some level of stealth is desired as well. I've read so many good things about the HO 10, too bad it's really more of a ported type driver.

Maybe I'll take a look at the DIYMA 12, although that thing is a heavy pig, isn't it?

 

[mcsoul 10+ year member]

Is inverting the cone an option?

And do you know what amp your going to run yet?

 

[DejaWiz 5,000+ posts]

RE SL 12

JL Tw5

SI BM 12

 

[coyote_5 10+ year member]

Is inverting the cone an option?
And do you know what amp your going to run yet?

Nope, this is going in the rear wheel well of my Outback, and I need the rear cargo area to be as functional as possible. Lots of things banging around back there from time to time...

Amp isn't purchased yet, but I was mostly likely going with a sundown 100.2 bridged which gives (I think) 450ish @ 4ohms.

 

[mcsoul 10+ year member]

10" sorry:

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=5807

could go 12":

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=2034

10" is a better fit for that enclosure.