1 ohm???

[goingdef 10+ year member]

Btw it's a mono amp and each sub is 2ohms when wired to the amp get me a 1ohm load.

 

[Timmy13091 10+ year member]

Btw it's a mono amp and each sub is 2ohms when wired to the amp get me a 1ohm load.

No one set of wires from amp I'm just gunna try and tap into both could see if it sounds better I guess basically same as diagram but wired from amp going to one coil not one wire on each coil to amp

 

[goingdef 10+ year member]

post a pic when your done before you start it up if you aren't sure.

 

[rebelfromva 10+ year member]

Your running a tyPe r and a xcon?

 

[goingdef 10+ year member]

Your running a tyPe r and a xcon?

I thought the same thing he's trying to compare the wiring patterns between the two subs in different cars and why they appear different but are both at 1ohm.

 

[wErd 5,000+ posts]

1. Disconnect all wires and start from scratch

2. Follow the god d@mn wiring diagram, it's one sub setup, how can you **** that up

3. Learn how to put together a sentence with punctuation and meaning.

 

[ewadz3006 10+ year member]

View attachment 26536181

wow

 

[quackhead 10+ year member]

huh?

 

[Timmy13091 10+ year member]

1. Disconnect all wires and start from scratch2. Follow the god d@mn wiring diagram, it's one sub setup, how can you **** that up

3. Learn how to put together a sentence with punctuation and meaning.

Wow your so cool man glad I come to this site for some help typing with my phone quick and super cool people like you feel the need to talk trash I did follow the diagram I'm only asking if the way I have type r is correct because that's how it was when I pulled it and wanted to know if it had been running on one coil

 

[ancorp 10+ year member]

Hey bud, if you already have the coils connected together (+ to + and - to -) in parallel, then you just run one + and one - wire from either coil to the amplifier. Don't have to run to both since you've already connected them to each other.

Hope this helps.

 

[wErd 5,000+ posts]

Wow your so cool man glad I come to this site for some help typing with my phone quick and super cool people like you feel the need to talk trash I did follow the diagram I'm only asking if the way I have type r is correct because that's how it was when I pulled it and wanted to know if it had been running on one coil

Nobody understood what the hell you saying. I'm on my phone and look...I have periods, and commas. People can't help you, if they don't know what you're asking. Follow the wiring diagram and you know you'll have it right.

 

[Timmy13091 10+ year member]

Hey bud, if you already have the coils connected together (+ to + and - to -) in parallel, then you just run one + and one - wire from either coil to the amplifier. Don't have to run to both since you've already connected them to each other.
Hope this helps.

Thank you !!!!!!!!! Haha I'll try to rerember my periods for the school teachers above me

 

[Timmy13091 10+ year member]

And if they are on both that's ok too right cause that's how diagram and my other sub are

 

[pro-rabbit 5,000+ posts]

1 OHM =

 

[Toone 10+ year member]