01 Chevy S-10 Extended Cab

[DonH 5,000+ posts]

Thanks for the compliments guys. The subs are Audiopipes TXX-AP15RD's

wuh bout amp??

 

[FootlongSam 10+ year member]

I let Eric borrow my Nitro amp and some 4 gauge wiring until he got his Audiopipe 1500.1 and 1/0 Knu wire ordered. While I was at work, he got the subs in, amp mounted and all Wires ran. This is on Stock electrical.

The amp tucked on the side. It looks pretty neat in person.

Everything still needs to be vacuumed and cleaned up, but I'm pretty **** happy with it.

And as for the single layer Baffel (yes, Its been a concern) It does move a little. I'll talk to him about using all-thread, or even a 2x4 from the middle of the baffel to the back of the box.

Btw: This was my first time carpeting, so be easy on the comments plz //content.invisioncic.com/y282845/emoticons/blush.gif.99bc659ee2012b7d826165e26fb5eebe.gif

OOh, And we ran out of carpet for the bottom Passenger side foot (underneath the amp), So Yes, I know its like that It will get carpet as soon as He wants to buy another roll :lol:

 

[jdawg 5,000+ posts]

i woulda picked a lil better sub, they should be ok, box looks good though

 

[01 S 10 10+ year member]

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh://content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh:
no way! hows it sound? wut kinda numbers you put up? how much you throwing at it?

never had that setup metered. it was running off a sundown saz1500 @ 1 ohm, sounded awesome, but it could of used a larger box. I had it in 5.6cf net, tuned to 30hz. If you do 7cf it will be great. give it atleast 1,000w. if i had to estimate how loud it was, compared to my other setups, i would say right around 144-145 w/ windows down, probably 143 sealed up. it surprised the hell out of a lot of people lol... (how loud it was, and how big it was //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif)

 

[DonH 5,000+ posts]

what amp bro??

 

[FootlongSam 10+ year member]

First Video:




Keep in mind this was off like 700 watts RMS and WILL be seeing double the power when the new amp is ordered.

And Yes, To our surprise, the truck was covered entirely in Deadner thanks to the previous owner, LOL!

 

[01 S 10 10+ year member]

looks pretty good there! get it on the meter...

 

[DonH 5,000+ posts]

never had that setup metered. it was running off a sundown saz1500 @ 1 ohm, sounded awesome, but it could of used a larger box. I had it in 5.6cf net, tuned to 30hz. If you do 7cf it will be great. give it atleast 1,000w. if i had to estimate how loud it was, compared to my other setups, i would say right around 144-145 w/ windows down, probably 143 sealed up. it surprised the hell out of a lot of people lol... (how loud it was, and how big it was //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif)

Ima give it about 1400 @ 1ohm rms daily //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

my fusion shall put out! gona throw a kinetik in the back and my optima up front.

i wana be loud! my 12's are loud but meh i want an 18 for the wow factor

 

[FootlongSam 10+ year member]

what amp bro??

Audiopipe 1500.1

But in the first video, it was a shitty nitro (waiting for the audiopipe amp to come in)

 

[perfecxionX 10+ year member]

howd you make those subs in sketch up? i cant even figure out how to draw curved surfaces.

 

[DonH 5,000+ posts]

um im thinking some support is needed here!!!

atleast some all thread! to bad you didnt double the front!

 

[01 S 10 10+ year member]

First Video:

good stuff! any sound deadener? sounds like your broke the brace loose from the roof (only some sticky foam holding it to the roof). once you break that loose, you know you have a loud system in a s10 lol

 

[FootlongSam 10+ year member]

The amp came in so we decided to pull it out and clean everything up. I added 1.25" Dowel rods to strengthen the baffle

 

[FootlongSam 10+ year member]

Heres another video just before the CD player took a shit. The highs weren't hooked up but on 2 tweeters. Since this video, we have replaced the CD player and tunned everything.



I'll have to get a better video in the daylight of how it sits

 

[DonH 5,000+ posts]

Heres another video just before the CD player took a shit. The highs weren't hooked up but on 2 tweeters. Since this video, we have replaced the CD player and tunned everything.

hehe cool!