protect mode

  1. Danielmccusky

    Amplifier turns off at high volume

    Hello. I recently installed a new head unit, amplifier, and two 12 inch subs in my car. Everything works properly, but when I turn the volume high and the bass hits hard, the amplifier will go into protect mode. The amplifier is rated at 650 watts RMS (@2ohms). I have two 4ohm subs wired to two...
  2. Jeano221

    Amp goes into protection mode after turning radio up🤦🏽‍♂️

    So I’m having a issue with my amp going into protection mode after turning the radio up, it’s a stock bmw radio and the positive and ground are 11.90 when cars off and 13.60 when car is on, I switched amp snd still did the same thing... don’t know what else to check. Do if anyone can Help me...
  3. Z

    Amp goes into protect mode with heavy bass at medium to high volume

    I recently bought a sub and amp. The sub is a 4 ohm kicker 10c, but a multimeter reads it at around 2 ohms. When bass plays, the volume of the speakers drops significantly and the amp goes into protect mode. I have searched the web extensively in an attempt to fix it, but I haven't figured...
  4. B

    AudioPipe Shutting Down Issue

    Good morning forum members, I hope this is the right subforum to ask this question. Background Last week, I made the decision to install a Rockford Fosgate P3-2X12 loaded enclosure in my 2015 Audi A3. The current system is comprised of a Bang and Olufsen OEM amplifier with B&O speakers...
  5. Zackster

    AMP rapidly going in and out of protect

    Before there's even any music playing, the amp will go in and out of protect mode rapidly and randomly. Along with that the subs pop/pulsate every time the amp goes in/out of protect. What's the deal? Full Setup: subs: 2 12" pioneer TS-W303R @4ohm 250watt rms each 1200watt max in a sealed...
  6. Zackster

    AMP going into protect...

    Be honest... is my amp just ****** and can't produce enough power for my subs, or am I doing something wrong? My amp is a Crunch powerzone pzi 2250 1000 watt max 2 channel 250watt rms per channel (bridgeable @ 4 ohms). My subs: 2 Pioneer TS-W303R 12" 250 watt rms 1200 watt max 4ohm SVC. I...
  7. MUTATED_FORM

    Help!! Amp keeps going into "protect mode"

    My amp keeps going into protect mode every time I get to a certain volume level. Depends on the song where that is. But say i turn my head unit up to "25" and it goes off, all i have to do is turn it down to "24" and it comes back on. Does it all the time. I can turn it up to a certain level...
  8. A

    Kenwood HU in protect mode

    Alright, so after installing my subs and amp, i was jamming out to music with my friend for about and hour, when all of a sudden all the speakers turned off besides the sub. I restarted my car and the HU went into protect mode, i also disconnected the battery and plugged it back in to reset the...
  9. A

    Amp stuck in protect mode

    First of all this issue is similar to the one asked in this thread, but even after reading the complete thread the solution, my problem is not fixed, hence starting a new thread. So here are the details of the issue, I was doing some cable management in my car and for that I detached the B+...
  10. M

    Kenwood radio protect mode

    2 days ago I fried my amp and melted some of the wires, so I took out my entire system. I have my subs and my voltmeter in there still. I still have the RCA's and the blue cable that connects my radio to my amp as well. Those are however just laying around in the back of the car. Anyways...
  11. I

    Why would my Hifonics Hifi 2000 keep going into protect?

    I have had the same system for about two years. With absolutely no issues other than fuses. I'm running two fuses now two Kicker 150amps and haven't had any problems with them. But last night I was bumping, heading to a friends house and my amp shut off. This has happened before but very...
  12. G

    New installation: 1 amp works, 1 amp in Protection mode. Can not figure out why??

    Just installed JVC DVD head unit. MB Quart in the doors (Honda Accord 4 dr SE), Infinity Reference in rear deck, double JL Audio 10wxv2 in JL Audio box. Front stage wired to 2 ohms, same with rear and subs. Front and Rear stage powered by JL Audio 360/2 and subs powered by 250/1. I finished...
Top