but I dont know where to get a box design.
Thanks, it'll be a while before I do anything so I can save up some money but I'll probably end up building a box no matter what I end up with.Jeez... I wonder where?
It'll do fine on your power but will actually do great on about 2X that Kicker amp too.
I'm usually on and off here so message me when your ready if you do it. I'm tired of all the debate and ya buts. Its a LOW budget system and using your power for now too. Under $120 easy if you do the work yourself.
I'm sure we can come to a price for a design agreeable to both of us...
Is this something that eventually I should get a bigger amp for.
I was talking about the sfb1500 sorry for not clarifyingThe amp you have (600@2ohms) wont run that box
If I was going to get an amp to run it and was looking to spend as little as possible I would look at
https://www.woofersetc.com/c-3-ampl...s-class-d-amplifier-fullrange-full-range.html
You could probably squeak by with the 1500 version but for $40 is more than worth it to get the 2000
This would work as well
https://www.amazon.ca/Taramps-1800w...46c11&pd_rd_wg=ZKKJZ&pd_rd_i=B07BWQXY91&psc=1
Ok thanks for all the info I really appreciate it. When I get the new stuff set up would you still be interested in buying the Box That Rocks I don’t know what it’s worth but I think that was you who asked about it in the beginning of the threadBuck doesn't charge much for a basic design you will have to ask him but iirc its around 30-40 bucks for basic ported boxes and it is worth every penny. For more complex designs he charges more but for what you wanted it should be a basic subwoofer box design. He will want pictures of the area working with, exact measurements of the area you have to work with, type of music you listen to regardless if it is a couple different genres he will take all that into consideration along with the amplifier you are using as well. He is good to work with and everyone so far has said his stuff is top notch. He has a thread going here on some of his designs. Just send him a pm @Buck and he will get back to you when he is feeling better as he is down right now with severe allergies and hasn't been very active the past week but I know you are not in any rush anyways.
so why do I want the classic and not the v2 and aren’t the amps they have 1ohm so wouldn’t I want 2 ohm. I have no clue what I’m talking about but if you could clarify this just so that I can know why. Part of the reason I made this was so that I could learn and this is one of the things that confuses me.Click 2K then 12" SA Classic Series and Dual 4ohm. Personally I am not a fan of anyone signing my stuff but up to you. At least these guys are standup professionals with great reputations.