SlugButter
CarAudio.com VIP
3 at least. 3.5 would be my choice.So if I build a 3 cu. ft. box with a slot port; how wide should the port be? It'll be 12.5" tall... so I was thinking 2 or 3 inches wide?
3 at least. 3.5 would be my choice.So if I build a 3 cu. ft. box with a slot port; how wide should the port be? It'll be 12.5" tall... so I was thinking 2 or 3 inches wide?
He knows that better then anyone around here.
I've used PWK or Pete for a few boxes and although it is an added cost, his designs are good and he's knowledgeable.I'm pushing it with a Kicker KX800.1. The spec sheet that came with it says it's pushing 907 watts RMS so it "should" match perfectly with the X. Any good custom box designers you know of in the Houston or Dallas area?.. or someone online to design it and I build it?
Like who? I always read JL w6 w7 are great performers, i've never heard JL so I would have to try it out to know.JL while nice is also overpriced imho. There is a ton of subwoofer brands that are equal or better for the pricing.
I mean i feel this way about subs in general, not just JL.Problem is though most people beat the crap out of them, personally I wouldn't trust people on those sites but that is just me. Not unless I did a complete recone on it.
geese 3 cubes, I mean yea but you can get away with 1.5 cubes, it starts to get diminishing returns after that as it goes up in box size and only increases the bass extension by a little. But if you only have one sub and you can fit 3 cubes then why not.I would do 3 cubes at 28 hz with the type X. The w6 is more efficient ported than the type x, in terms of box size. That x wants to be in a big box tuned super low, with lots of port area. 40 sq inches or so. my opinion.
Rear firing even if the box is pushed up against the rear seat? It won’t suffocate it too much?
Amazing what a little airspace, port area and configuration can do huh?Built the box he designed today, and the Alpine X is actually sounding the way I think it should. I might actually keep it