Back for More Abuse (Saw my Dr.)

[Bobbytwonames 5,000+ posts]

I was wanting to give Shredder2 an update in the box that he designed for me. So, you all can let me have it, again.

Click to read more...

 

[mahc 10+ year member]

 

[Popwarhomie 5,000+ posts]

Wrong section again...

 

[Bobbytwonames 5,000+ posts]

Wrong section again...

What section then? I actually thought about it this time.

 

[Popwarhomie 5,000+ posts]

The Thunderdome.

 

[Boomin_tahoe 5,000+ posts]

Nobody cares.

 

[Bobbytwonames 5,000+ posts]

Nobody cares.

Hey, I'm trying to see if the meter number I hit today is decent. Or, should it have been higher. Real talk.

 

[Boomin_tahoe 5,000+ posts]

**** the meter. If it's loud enough for you then that's all it matters.

 

[Gunk]

What'd you hit on the meter?

 

[Bobbytwonames 5,000+ posts]

What'd you hit on the meter?

The guy mounted a meter on my windshield and it hit 143.8. He said there's more in it. It still needs dialed in. Why do my pics show up sideways?

 

[Popwarhomie 5,000+ posts]

Did you frequency sweep it? What frequency did it peak at. Should have well over a 45 in it.

 

[Bobbytwonames 5,000+ posts]

Did you frequency sweep it? What frequency did it peak at. Should have well over a 45 in it.

I'm not sure on the frequency. I know that the meter suction cupped to the windshield and one of the doors was open. He was just playing some song on his bluetooth. Just deck, amps, and speakers. No external crossovers or DSP. I need to still upgrade the amp power wire to 1/0.

 

[Boomin_tahoe 5,000+ posts]

I'm not sure on the frequency. I know that the meter suction cupped to the windshield and one of the doors was open. He was just playing some song on his bluetooth. Just deck, amps, and speakers. No external crossovers or DSP. I need to still upgrade the amp power wire to 1/0.

Uh what?? Why wasn't this done prior to installation?? May have an affect on your audio

 

[Bobbytwonames 5,000+ posts]

Uh what?? Why wasn't this done prior to installation?? May have an affect on your audio

The power wire from the battery to the sub amp is only 4 gauge right now. The installer was insisting on using 4 gauge. So, I didn't want to argue with the guy, and gave in. It's only a 2 foot run from battery to amp. I also need to install the new Pioneer tweeters (fried the first ones) and Taramps crossover. I need the crossover because the Taramps DS800X4 doesn't have frequency crossover points. Should all be done next week.

 

[Popwarhomie 5,000+ posts]

The MD3000 has 4 gauge power and ground inputs. They are designed to be placed close to rear battery banks so a short run of 4 gauge is plenty for them.