Jump to content


Recommended Posts

have another thread on figuring out aeros. fasfocus helped but now im getting people saying its not right.

 

until the aeros come together i will have a slot port.

 

need 2.5cubes at 35hz

 

30w x 14h x 15d gives me about 2.5 after sub displacement

 

what lengths and height should the slot be?

 

(does the enitre slot port area also count as displacement? my above net volume is assuming its a sealed. idk if the port would also take away?)

 

thanks again guys. this site has been real helpful since i found it. hope i can help some of you guys out whenever i can in return!


2005 Lexus GS300

-DC Power XP 270 H/O Alternator, Big 3, Kinetik HC2400, XS D680 in trunk

-Stock NAV unit w/ RF 3sixty.3

-JL HD 1200/1

-JL HD 600/4

-Hybrid Audio Clarus front stage; Diamond D6 rear fill

-2x 10" Ascendant Audio Chaos in 4th order.

watermarkfinal2-1.jpg

Share this post


Link to post
Share on other sites

re.jpg

 

going the re way for now since i dont have any responses yet.

do these re calculations look right?

thanks again.


2005 Lexus GS300

-DC Power XP 270 H/O Alternator, Big 3, Kinetik HC2400, XS D680 in trunk

-Stock NAV unit w/ RF 3sixty.3

-JL HD 1200/1

-JL HD 600/4

-Hybrid Audio Clarus front stage; Diamond D6 rear fill

-2x 10" Ascendant Audio Chaos in 4th order.

watermarkfinal2-1.jpg

Share this post


Link to post
Share on other sites

have another thread on figuring out aeros. fasfocus helped but now im getting people saying its not right.

 

until the aeros come together i will have a slot port.

 

need 2.5cubes at 35hz

 

30w x 14h x 15d gives me about 2.5 after sub displacement

 

what lengths and height should the slot be? depends on whic hway its facing. back up et cetera. subtract 1.5 from that sides length.you'll want 25-40 sq in of port area. depending on the sub your using. example with that box if you were going to have port facing rear. the port would be 12.5 tall x 2~3.5wide.the length will then vary based on whaat size the port is.

(does the enitre slot port area also count as displacement? my above net volume is assuming its a sealed. idk if the port would also take away?)

yes the ports displacement must also be taken into account. if youd like some more help with this id be more than glad to help you via pm. or i can do you a design with 3D sketch for a small fee.

thanks again guys. this site has been real helpful since i found it. hope i can help some of you guys out whenever i can in return!some of us try to help whenever we can :) glad to hear you plan to be a positive contributor


need a box design? click here or email Dragonsk8er14_2@yahoo.com

1997 Buick LeSabre Limited

wiring:2 runs (2 pos 2 neg) of 0 ga big 3 in 0 ga 50 ft of knu cca, and 36 ft of the wire loudcartunez sells...

Head unit: Kenwood excelon KDC-X692

Sub Amp: Autotek Mean Machine 4000D

Subs: 2 custom 15s built by ssackett

Sub box: 4th order bandpass 2.52 cubes sealed 5 cubes ported tuned to 59 Hz

comp amp: CDT SQA4100

Comps: 2 sets of CDT CL-61i

Deadening: 50 cld tiles and 20 sq ft of damp pro.

feedback please post if you have had any transactions.

http://www.caraudio.com/forum/showthread.php?p=6113819#post6113819

Share this post


Link to post
Share on other sites

Create a free account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's free & easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×