Hey so I'm considering building a custom under seat box for my Wrangler JL. I've seen talk about up and down firing under seat subs not being ideal, is this something that can work? I found this box on ebay to use for reference:
He claims 1.1 cubic feet of air space. Im considering replicating this enclosure for either 2 12s or 2 10s. Would it be possible, and worth it to "wall off" each side of that box at the center hump and make that a port? I haven't measured what the dimensions would be precisely, but likely 2-3 inches tall, 6-8 inches wide (width could be expanded if needed) and the length of the box. Port could be either forward or rear firing. Opinions? I'm very novice at box and port design, so just looking for pointers. Have not purchased any materials or components yet, so open to recommendations.
Thanks for any help.
He claims 1.1 cubic feet of air space. Im considering replicating this enclosure for either 2 12s or 2 10s. Would it be possible, and worth it to "wall off" each side of that box at the center hump and make that a port? I haven't measured what the dimensions would be precisely, but likely 2-3 inches tall, 6-8 inches wide (width could be expanded if needed) and the length of the box. Port could be either forward or rear firing. Opinions? I'm very novice at box and port design, so just looking for pointers. Have not purchased any materials or components yet, so open to recommendations.
Thanks for any help.