Working w/factory Tahoe headunit

camdog
10+ year member

Member
33
0
Atlanta
How can I get a great system using the factory Delco headunit (I prefer the look). Is the output quality good enough? Would I upgrade the speakers? and add a box. Something like this.

Infinity components front

Infinity coaxials rear.

Infinity BASSLINK woofer plus amp.

 
and is also 1and a half DIN size. There's like 4 or 5 headunits that are made specifically for the GM and Chrysler slots. If I could get a OEL screen on a 1.5 DIN, that would be sweet.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Figured it out. For some reason my rca cables would work in everything but the new head unit. I quickly tried a spare set, and that fixed the problem.
1
808
There isn't much it can be. Pull the amp turn on wire out of the amp, and just run a wire from there and touch the distro block will activate...
6
1K
Its lasted 19 years thus far. Could be something as simple as a wiring connection as stated. Nothing in electronics last forever. Its had a great...
8
1K
The amp should still turn on regardless of your settings. Those settings will probably cause almost no power to come from the amp, but thats a...
1
1K

About this thread

camdog

10+ year member
Member
Thread starter
camdog
Joined
Location
Atlanta
Start date
Participants
Who Replied
Replies
3
Views
433
Last reply date
Last reply from
bootleg
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0

New threads

Top