Wiring Tweeters???

  • 5
    Participant count
  • Participant list
I know I am going to catch Hell about this from people that don't understand where I am coming from, but you actually want a heavier gauge wire for the same length of run, for the same power thant you do for a mib-bass speaker. If you are running active and have a long run all the way back to the trunk, it can't hurt to go ahead and use 12 AWG. If you want a better explination as to why the smaller speaker needs more wire, PM me and I can fill you in

 
I know I am going to catch Hell about this from people that don't understand where I am coming from, but you actually want a heavier gauge wire for the same length of run, for the same power thant you do for a mib-bass speaker. If you are running active and have a long run all the way back to the trunk, it can't hurt to go ahead and use 12 AWG. If you want a better explination as to why the smaller speaker needs more wire, PM me and I can fill you in
Are you hinting at higher frequencies generating a greater skin effect.... ?

 
I know I am going to catch Hell about this from people that don't understand where I am coming from, but you actually want a heavier gauge wire for the same length of run, for the same power thant you do for a mib-bass speaker. If you are running active and have a long run all the way back to the trunk, it can't hurt to go ahead and use 12 AWG. If you want a better explination as to why the smaller speaker needs more wire, PM me and I can fill you in
Id like to see this.

 
1000 points to Flex. Depending on the wire though you could get laminated strands which will help cut this down.

EDIT: I noticed I wrote 12 AWG in the first post, for 60 Watts, you should be fine with 16. Sorry about that

 
Last edited by a moderator:
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yup , the dsp should have input sections, it may have one for sub? Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
2
204
Box rise, more accurately, impedance rise, is the reactive load changes the woofer exhibits at different frequencies and it will happen, it's...
4
446
thanks 1aespinoza for advice I decided to not use the blaupunk I got a real nice Pioneer.
2
354

About this thread

trenthonda1

10+ year member
Member
Thread starter
trenthonda1
Joined
Location
Florida
Start date
Participants
Who Replied
Replies
5
Views
5,342
Last reply date
Last reply from
All_Logix
IMG_0692.jpg

just call me KeV

    May 1, 2024
  • 0
  • 0
IMG_0691.jpg

just call me KeV

    May 1, 2024
  • 0
  • 0

Latest topics

Top