wiring needed

[taintedplay 10+ year member]

what all wiring do i need for this?

i have a HU (already in car with harness and all that) but i need wiring to: 2 amps, 4 componet speakers, two type r 1242d 12inchers

Click to read more...

 

[shaneb 10+ year member]

what kind of amps. i have a inline fuse with holder i will sell ya.

i have some 8g wire....

 

[taintedplay 10+ year member]

componet amp: '08 HIFONICS TXI6408 680W A/B CLASS 2/3/4CH AMP NEW -

sub amp: HIFONICS TXI1008D CAR AUDIO 1000W CLASS D AMPLIFIER -

sub 2x Alpine SWR-1242D type r

head unit: PIONEER DEH-P4000UB CAR AUDIO/STEREO CD/MP3 PLAYER 4000 -

speakers

Polk Audio db571 back

Pioneer TS-A6872R front

 

[shaneb 10+ year member]

your gonna need to run 0g to the back and put a distroblock on it and run 4g into the amps.

my fuse holder wonthelp. and my 8g is only applicable in your setup for the sub wiring...

but anyway, those are the things you nee.

you also need a 0g fuse holder with about a 150aish fuse

 

[taintedplay 10+ year member]

so i need 0g to the trunk, then 4g to both amps. On the 0g to the trunk i need a 0g fuse holder with 150a fuse. what about wiring to the speakers, subs, all that? i have no wiring at all at the moment except wiring harness

 

[taintedplay 10+ year member]

what about to door speakers? im guessing i need rca's? and what kind of powerwire goes from the amp to the door speakers?

 

[bunkerking09 10+ year member]

ok, let me see if i can get all of this...

you need enough 12 g wire to run from your door speakers to your component amp

you need enough 8-10 g wire to wire your subs to your sub amp

you need a run of 1/0 g wire to the trunk

you need a distro block to split it into 2 2 or 4 gauge power wires

you need enough 4 gauge to run your grounds and from the distro block

i think i got it all

 

[bunkerking09 10+ year member]

you also need 2 sets of RCAs to run from your headunit to each amp

 

[taintedplay 10+ year member]

ok, let me see if i can get all of this...
you need enough 12 g wire to run from your door speakers to your component amp

you need enough 8-10 g wire to wire your subs to your sub amp

you need a run of 1/0 g wire to the trunk

you need a distro block to split it into 2 2 or 4 gauge power wires

you need enough 4 gauge to run your grounds and from the distro block

i think i got it all

on the 12g wires to speakers from comp amp, dont i need twice the distance? for two wires to each comp? (im guessing + and -)

and same for subs to sub amp

then 2 or 4 gauge from the distroblock to power the amp

and the fuse (150a) would go between the distroblock and the battery?

 

[bunkerking09 10+ year member]

on the 12g wires to speakers from comp amp, dont i need twice the distance? for two wires to each comp? (im guessing + and -)and same for subs to sub amp

then 2 or 4 gauge from the distroblock to power the amp

and the fuse (150a) would go between the distroblock and the battery?

most speakerwires that size come connected as a pair, if not then yes you'll need twice the length

and yes connect the fuse within 18 inches of the battery if possible.

I have all this wire and i could sell it to you btw, feel free to PM me

 

[taintedplay 10+ year member]

alright bro ill think of taking that off your hands. just to make sure im getting what you mean, this is all i would need?

http://www.knukonceptz.com/productDetail.cfm?prodID=KOL-AK8

8ga amp kit

http://www.knukonceptz.com/productDetail.cfm?prodID=KND-23

distroblock

http://www.knukonceptz.com/productDetail.cfm?prodID=KLMX0BL

1/0

http://www.knukonceptz.com/productDetail.cfm?prodID=KLMX4BL

4ga for distroblock to amp and then amp to ground

http://www.knukonceptz.com/productDetail.cfm?prodID=KLMX8BL

8ga sub amp to subs

http://www.knukonceptz.com/productDetail.cfm?prodID=KLA-5M

rca HU to amps

http://www.knukonceptz.com/productDetail.cfm?prodID=KLE12BL

12ga speakers to comp amp

http://www.knukonceptz.com/productDetail.cfm?prodID=ANL150

fuse

also is it smart to get two amp wiring kits or just buy the seperate wires

 

[bigaudiofanatic 10+ year member]

For the front speakers i just top into the speaker outputs behind the dash and than run the wire to the back to the amps. I was rely well and have been doing it for a while now.

 

[taintedplay 10+ year member]

does the distroblock to amp and then for mp groudns have to be 4ga? or will 8ga work?

 

[taintedplay 10+ year member]

is this all i need in total for two subs, 4 door speakers, 2 amps

100ft of 10ga (which ill use when i get my subs thats why im just buying alot of 10 and not 12)

(2x) 8ga amp wiring kit http://www.knukonceptz.com/productDetail.cfm?prodID=KOLAK84

1/0 to the trunk

distroblock

and the kit comes with rca's

150amp fuse

do i need side battery terminal things?

does the distroblock to amp and then for mp groudns have to be 4ga? or will 8ga work?

 

[taintedplay 10+ year member]

bump