Wiring Help.

[Zacmc212 10+ year member]

I installed a LOC and found the wiring guide for the stock radio, and was wondering which one should i split for the Remote wire...

this is in a 2002 ranger...

12V yellow ignition harness(IH)

Ignition red/lt. blue IH

Accessory lt. green/purple IH

2nd Accessory black/lt.green IH

Power Lock pink/yellow driver door harness or PKP

Power Unlock pink/lt.green *4 driver door harness or PKP

Lock Motor pink/black driver door harness

Unlock Motor red/orange driver door harness

Disarm Defeat pink/orange passenger kick panel

Parking Lights brown headlight switch or GEM *1

Headlights red/yellow headlight switch

Door Trigger *2 GEM *1

Dome Supervision use door trigger

Tach tan/yellow instrument cluster or PCM *3

Speed Sense grey/black GEM *1

Brake Wire lt.green brake pedal switch

Horn Trigger yellow/lt.green steering column

LF Window Up/Dn wht/blk-red driver window motor

RF Window Up/Dn wht/yel-tan/lt. blu driver door harnessor PKP

Radio 12V lt. green/purple radio

Radio Ground black radio

Radio Switch yellow/black radio

Radio Illuminate lt. blue/red radio

LF Speaker org/lt grn-lt.blu/wht radio

RF Speaker wht/lt.grn-grn/org radio

LR Speaker gry/lt. blu-tan/yel radio

RR Speaker org/red-brn/pink radio

Also for some reason the radio is not turning on with the car, any ideas? everything is the same as before except the 4 wires that were split for the LOC.

thanks.

Click to read more...

 

[jrz126 10+ year member]

The 'Radio Switch yellow/black radio' would probably be a good candidate for your remote wire

 

[Zacmc212 10+ year member]

I used the "Radio 12V lt. green/purple radio" for the remote, and it gives the amp power, but it doesnt turn off with the car. Is this a big deal? because it is only drawing enough power to light up the green "on" LED right?

I will try the other wire tomarrow, i completely forgot to try the recomended "'Radio Switch yellow/black radio' " and my friend has already left.

 

[Zacmc212 10+ year member]

anyone?

 

[jrz126 10+ year member]

no, its drawing more power than just lighting up the LED.

use the yellow/black wire and you'll be fine

 

[Zacmc212 10+ year member]

no, its drawing more power than just lighting up the LED.use the yellow/black wire and you'll be fine

Think it will be ok over night? //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[maldecido33 10+ year member]

No, your battery will be dead in the morning. (Yes, I'm serious)

 

[Zacmc212 10+ year member]

No, your battery will be dead in the morning. (Yes, I'm serious)

He went to work a 430 and it started when he left (11ish) so thats good. I just called him and told me to take out the power and wrap it in elec tape untill toamrrow, so i should be fine. I hope that yellow/blk wire works for remote cause a ranger forum told me to use a different one and it didnt work at all.

Thanks

 

[NhustlaR 10+ year member]

if none of those work, try a test light and run it from the fuse box.

 

[Zacmc212 10+ year member]

if none of those work, try a test light and run it from the fuse box.

Alittle over my head on that one....

care to help me out alittle?

Thanks