echohype 10+ year member
Junior Member
Alright guys, how would I go about wiring all this together? Here's the basic idea of what I wanna have done.
3 Amps, 1 to power my 4 speakers in the car(polk audio mmc6500's, like 180
rms, 300 peak)
the other 2 amps(http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5777737875&ssPageName=STRK:MEWA:IT)
wired at 1 Ohm, and one amp powering each sub. Those amps, the brutus, is 2000 watts at 1 ohm, 1300 at 2 ohms.
as for the subs, I'm trying to decide between three types(all audiobahns) and I want 2 subss:
1)AWES12 Eternal Series - 1300 Watts RMS, Dual 4 Ohm Voice Coil(so I know these would have to be wired in 2 Ohm configuation)
2)AWIS10P Immortal Series, 1500 Watts RMS, Dual 2 Ohm Voice coils
3)AW1208T 1500 Watts RMS, Dual 2 Ohm Voice Coils.
So, with 2 of those amps, which set of subs would be best, how could I wire them and how od I wire them? I plan on putting in a second battery with an isolator to power the system. Would I run power from t hat battery to one amp, then connect the two? How do I get the 2 sub amps to power just the subs and the smaller amp to power just the speakers?
any help would be appreciated, thanks!
** just want to note, I'll be fiberglassing the entire cargo area of my car for all of this. I'm doing something curvy and such. As for the base of all this, should I build a sub-floor? or what, and I guess use MDF as the framing, then fiberglass around that? thanks!
3 Amps, 1 to power my 4 speakers in the car(polk audio mmc6500's, like 180
rms, 300 peak)
the other 2 amps(http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5777737875&ssPageName=STRK:MEWA:IT)
wired at 1 Ohm, and one amp powering each sub. Those amps, the brutus, is 2000 watts at 1 ohm, 1300 at 2 ohms.
as for the subs, I'm trying to decide between three types(all audiobahns) and I want 2 subss:
1)AWES12 Eternal Series - 1300 Watts RMS, Dual 4 Ohm Voice Coil(so I know these would have to be wired in 2 Ohm configuation)
2)AWIS10P Immortal Series, 1500 Watts RMS, Dual 2 Ohm Voice coils
3)AW1208T 1500 Watts RMS, Dual 2 Ohm Voice Coils.
So, with 2 of those amps, which set of subs would be best, how could I wire them and how od I wire them? I plan on putting in a second battery with an isolator to power the system. Would I run power from t hat battery to one amp, then connect the two? How do I get the 2 sub amps to power just the subs and the smaller amp to power just the speakers?
any help would be appreciated, thanks!
** just want to note, I'll be fiberglassing the entire cargo area of my car for all of this. I'm doing something curvy and such. As for the base of all this, should I build a sub-floor? or what, and I guess use MDF as the framing, then fiberglass around that? thanks!