DarrylShelbyGT500
CarAudio.com Newbie
I need some help guys . I want to wire up some switches to my windows on my racecar. The windows, motors and regulators are installed . I have the wiring diagram but my electrical skills are novice at best . I have the window motor harness spliced and ready, and a couple 20amp fuse wires. However, There are about 8 wires coming from the window motor harness, so my question and where I need assistance at. Is what wires am I going to use for my switches? What wires do I bridge together to make the circuit possible ? etc .Below I have listed out the color and specificities of the wires coming out of the driver side window motor based on the diagram for my vehicle . Please assist me.
Driver window motor
Wire 1: Auto/ VT-LG
Wire 2: DACC/RD-LB
Wire 3: UP/ WH-BK
Wire 4: Down/ YE
Wire 5: Short Drop/ LG-BK
Wire 6: GOC/ LB
Wire 7: B+/VT-YE
Wire 8: GND/BK
Driver window motor
Wire 1: Auto/ VT-LG
Wire 2: DACC/RD-LB
Wire 3: UP/ WH-BK
Wire 4: Down/ YE
Wire 5: Short Drop/ LG-BK
Wire 6: GOC/ LB
Wire 7: B+/VT-YE
Wire 8: GND/BK