who wants to build me a box

[king ranch 5,000+ posts]

i need a custom box deisgned for 2 12's l7's that are dual 2 ohms that will be running on a 1500.1 kicker amp

i have around 34 inches in length and about 18 in width and anywhere from 20-25 in depth

i need the sub either facing up or down either way doesnt matter just need it so its sitting long ways its going in the back of a supercrew king ranch with bucket seats and i am taking out the back center console tommorow i will draw a sketch and see if possible to build

thanks

Click to read more...

 

[amedeuce 10+ year member]

PM bjfish11

http://www.fishercustoms.com/

 

[Chevillac 5,000+ posts]

designed and built, or jsut designed? im assuming sealed?

 

[king ranch 5,000+ posts]

i need one designed and built to fit within a certain area i want one ported

and i mainly listen to rap so w/e tuning will do the best for that i will take pics today of the space i have avaible for a box

 

[morgans432 10+ year member]

measure the dimensions pictures don't really help. Get depth width and height.

 

[king ranch 5,000+ posts]

ok well i only have about a 150 dollar budget for the box if its not gonna be around there then nvm

will this box work for what i have

http://cgi.ebay.com/DUAL-12-CUSTOM-KICKER-L5-L7-SUB-BOX-ENCLOSURE-4FT-3-32_W0QQitemZ170175664963QQihZ007QQcategoryZ18803QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[DarkFox 10+ year member]

work, yes, maximize those subs, no. If you can glue and screw wood together, you can take a cut sheet to Home Depot, Lowes, or whatever store like that you enjoy going to, you can build your own box for less then half the cost of that.

 

[DarkFox 10+ year member]

correction, the box is $90, the shipping is $60. so thats 150. You can build your own for about $30 and it will sound better. Hell, the corner of my sheet of MDF I bough has about a 3 inch chip taken out of it, so my wood cost me $15 and the total box with a tube of squeeze caulk and some screws was about $20

 

[king ranch 5,000+ posts]

well i wouldnt mind building myself a box but i am wanting a ported box and i dont kno how to make one of those and make it so its tuned to the certain amount

but here are some drawings of the box i need built if possible would someone that knos how to build boxes let me kno

thanks

if they are hard to understand ask me to explain

thanks

 

[SPLnut34 10+ year member]

Which direction are you going to have the subs facing?

 

[DarkFox 10+ year member]

If you use just the square part in the front to simplify your build, so you dont have to make it come in and up for that part in the back, you still get about 5.5^3ft. Plenty of room for the 2 12s and a good size port. you can do subs up, and port back or foraward (I would probably go back) should turn out nice though.

 

[king ranch 5,000+ posts]

yes i want the subs facing up so it looks the best but the only problem i have next is finding someone to build me the box it has to be local so i can take my truck to them and let them get the exact dimensions

 

[jmanpc 5,000+ posts]

I'll build it for you. I live in Jacksonville, and I'll be there in a week.

 

[DarkFox 10+ year member]

given what you have said, make box external dimentions 18w X 26l X 25t, put subs on top, do a port to the rear, 16.5w, 3t, and 19.25L. This will give you about 4.55 tuned to about 33hz, should sound pretty good for what your going for.

 

[JDBuilder 10+ year member]

You have a PM