who makes a 200x4@4ohm

[chardy85 10+ year member]

Power Acoustik STAX2300/4 (stax23004) - 4 Channel Amplifier | Four Channel Amp - Sonic Electronix

PA STAX! lol

You never know.....it may do rated....

 

[gunz4me2 10+ year member]

Power Acoustik STAX2300/4 (stax23004) - 4 Channel Amplifier | Four Channel Amp - Sonic Electronix
PA STAX! lol

You never know.....it may do rated....

The 25x2 amps of fusing tells me NO on the rated power part.

 

[James Bang 5,000+ posts]

i was not implying that a watt is a watt regardless where its coming from. thanks for trying to newb me.

no prob newb.

 

[chardy85 10+ year member]

The 25x2 amps of fusing tells me NO on the rated power part.

LOL! True that.

I didn't even look at the specs page. I already assumed it was too good to be true. Fckn PA...lol

 

[sundownz Pro Seller]

Massive Audio HD1600.4 amplifier - DIYMA.com
Make sure to read through the whole thread; Lots of interesting things about that amp. I held off on suggesting it because of all the fishy business.

Factory rated 160 x 4 on that board -- not 200 x 4 -- the 160 is the biggest they make and, IMO, the ratings are pretty hopeful at 14.4v

 

[sundownz Pro Seller]

https://www.massiveaudio.com/manuals/Manual-HD-100708.pdf

HD1600.4 Fusing = 60 amps suggested...

---

The 200x4 I'm working on for 2011 requires a 200-amp external ANL fuse... I'd probably run a bigger one if it was bridged down as low as it will go... 28" long with 1/0 power terminals.

Primarily for markets outside of the USA but I'm sure some people here will like them too.

 

[michaellane 5,000+ posts]

no prob newb.

thanks boo

 

[michaellane 5,000+ posts]

https://www.massiveaudio.com/manuals/Manual-HD-100708.pdf
HD1600.4 Fusing = 60 amps suggested...

---

The 200x4 I'm working on for 2011 requires a 200-amp external ANL fuse... I'd probably run a bigger one if it was bridged down as low as it will go... 28" long with 1/0 power terminals.

Primarily for markets outside of the USA but I'm sure some people here will like them too.

got a idea on pricing? or got any decent protos youd like to sell that will do close to the rated power?

 

[michaellane 5,000+ posts]

Massive Audio HD1600.4 amplifier - DIYMA.com
Make sure to read through the whole thread; Lots of interesting things about that amp. I held off on suggesting it because of all the fishy business.

ya one is on egay right now but im still not too sure it will do much more then my dsc4125

 

[BloodyGuts335i 10+ year member]

i had a pdx 150.4 and the birth sheet said 171x4.. its small as hell and it gave good clean power.. also, I seen a planet audio amp that say its ratted at 175x4..

 

[DarkScorpion 10+ year member]

also, I seen a planet audio amp that say its ratted at 175x4..

it doesn't do rated, if you're talking about the bb175.4b

 

[sundownz Pro Seller]

got a idea on pricing? or got any decent protos youd like to sell that will do close to the rated power?

Similar to what the SAZ-2000D cost.

 

[misfit138 5,000+ posts]

Note: i'm not knocking Maxxonics, but you can't seriously expect a $200 amp to provide a listenable 125Wx4. You'd be amazed at what 125W RMS of Zapco power would sound like in comparison.

The Discus amps are pretty solid, bro. Tons of people are using them and hardly any complaints are posted...

 

[misfit138 5,000+ posts]

The 200x4 I'm working on for 2011 requires a 200-amp external ANL fuse... I'd probably run a bigger one if it was bridged down as low as it will go... 28" long with 1/0 power terminals.
Primarily for markets outside of the USA but I'm sure some people here will like them too.

I want one. //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif Would be super nice for powering an entire system...

 

[Wingman0121 10+ year member]

ohhhh a 4 channel amp that calls for a 200-amp fuse? Do show.