which is better I'd ctx65 or alpine type r spr-60?

I choped my doors to get the kickers in and people r so new to car audio that they r amazed my such a small system and a 900watt rms sub 

---------- Post added at 04:15 AM ---------- Previous post was at 04:15 AM ----------

 

Its a toyota corona st170
You can make a 500 watt system sound fantastic with all the right elements and preps.

Id have to google that car up..Ive never heard of that one.My brothers believe in Toyos..and Lexus..Thats all they buy,been good vehicles ..Im more of a Honda and Acura,and Chevy guy

 
The kicker bottoms out really easily thats y i hate it
Do some reading and look at some installs on some inexpensive ways to prep your doors,and you will get the most out of your speakers,and Imaging,and find the right speakers that you can afford/want to place and run in there for your money. Youd be surprised how much better a door speaker can sound with minimum preps.Tuning is a major key in performance .Some of the speakers Ive mentioned go down to 45 htz on the bottom end

 
I choped my doors to get the kickers in and people r so new to car audio that they r amazed my such a small system and a 900watt rms sub 

---------- Post added at 04:15 AM ---------- Previous post was at 04:15 AM ----------

 

Its a toyota corona st170
Hell, thats a nice old car!! Reminds me of the Nissan Stanza, or a Sterling.That car will run forever if you keep in mainentanced

 
I have done sound damping but the speakers just dont like the low notes but the alpines r a beast and even shakes my rear view mirror
You might look as Ive said at some inexpensive insulating door techniques that have been done, on the inner lining ans well as the face..If you are good with wood,cover with your choosing, you can make some nice pods and get those speakers or whatever speakers you choose on axis in which make a huge difference in performance rather than straight stock locations.I think I have two layers of 80 mill on the face of my doors and one layer of 80 mill on the inner face and completely sealed off just in my Honda alone,two ayers of 80 mill on the floor boards and 5/8" foam with the carpet, and I can hear almost nothing of road noise till I hit 75mph,but at a min.My door speakers are like IN MY FACE so to speak

 
I have done sound damping but the speakers just dont like the low notes but the alpines r a beast and even shakes my rear view mirror
I never could get my set of Type R components to sound clean..even with a good old Zed mean Machine 99

 
Id lower my gains, and set my crossover points/do some tuning on the speakers you have now and run them till you decide on what you want,and run what I have till then.

 
I never could get my set of Type R components to sound clean..even with a good old Zed mean Machine 99
I agree with you there. They are just lackluster overall, not to loud either. Looking to fiberglass a 10 inch midbass setup soon with mines and say eff it with the stock 6x9 location. Only got these because of their shallow mounting depth due to the neo mags.

Thanks for the help but what should i choose finally id or oolk?
If you want brighter sounding speakers then go with polks

if you want warmer sounding speakers, then go with ID

Polks can get a bit louder on less power. Image dynamics can handle loads of power but still wont get as loud as the polks. However both are still pretty darn loud

Its not whether one is superior to another, just one will please you more depending on what you like in a speaker.

no experience with infinitys so i cant comment on them.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

minhazul

Member
Thread starter
minhazul
Joined
Location
Dhaka ,Bangladesh
Start date
Participants
Who Replied
Replies
42
Views
2,567
Last reply date
Last reply from
minhazul
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0
IMG_2118.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top