What will I need for my install?

EzekialPhoenix
10+ year member

Senior VIP Member
ok, so you have an amp and and 2 subs. What else do you have? An aftermarket radio? Are you running any other pieces of stereo equipment, or just the subs and amp. If you are going to run an amp and subs off of a factory radio, rather than an aftermarket head unit, you will need different wires.

 
Purchase a 2 channel 4awg wiring kit from any number of places. that should have everything you need except maybe speaker wire. It should have power wire, ground wire, rca cables, remote wire, a battery terminal, fuse holder and fuse(s) and maybe some cable ties if they were feeling generous when they put the kit together. Make sure you fuse the power wire within a foot from the battery. that way if the sh*t hits the fan, you won't fry your amp and set your car on fire. Other than that, make sure you find, a good, secure, paint-free spot on the chassis to ground. Other than that, you should be good. Happy bumping.

 
Sorry buddy for leaving you hanging today. Had to run out quick, had an emergency. FREE PLAN.

3.png


3-3.png


3-2.png


3-1.png


CUTSHEET

3-4.png


Best I could do with your Diminsions. Cramped space in the trunk of a cavilier.

3.7 cubes @ 34.603 and some change Hz 43.5sq in. of port.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

EzekialPhoenix

10+ year member
Senior VIP Member
Thread starter
EzekialPhoenix
Joined
Location
Minneapolis, MN
Start date
Participants
Who Replied
Replies
6
Views
483
Last reply date
Last reply from
Chevyaudio
1778763859842.png

Doxquzme

    May 14, 2026
  • 0
  • 0
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top