What ohm subs?

[mgcauctions09 10+ year member]

I am about to order 8 alpine type r 10's. I will be powering all of them with 2 audiopipe ap30001d amps. I want each sub to see 750 watts. These amps are not strappable.

Click to read more...

 

[jpexpc 10+ year member]

DVC 2

Wire each sub in series for 4 ohms per sub and then parallel to the amp for a final 1 ohm load. 4 subs per amp.

 

[mgcauctions09 10+ year member]

DVC 2
Wire each sub in series for 4 ohms per sub and then parallel to the amp for a final 1 ohm load. 4 subs per amp.

It puts out 3000 @2 ohms I believe. So id would need d4 right?

 

[jpexpc 10+ year member]

3000~ @ 1

http://www.caraudio.com/forum/showthread.php?t=303314

 

[nickolas_j_t 10+ year member]

dual 2

 

[mgcauctions09 10+ year member]

Ok I found out from audiopipe they are 3000@2 ohms (bridged)1500@1 ohm per channel (2 channel)

So I ordered the dual 4's

 

[jpexpc 10+ year member]

I'm no expert but that makes no sense whatsoever.

 

[mgcauctions09 10+ year member]

what? ap30001d amp is a 2 channel amp not a mono. It is 1500x2 @1 ohm Or + from left sub input and - from right sub input = 3000X1 at 2 ohms

 

[drpeeb 10+ year member]

what? ap30001d amp is a 2 channel amp not a mono. It is 1500x2 @1 ohm Or + from left sub input and - from right sub input = 3000X1 at 2 ohms

You need to sketch this out.

 

[mgcauctions09 10+ year member]

http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~4~I~42 option number 2 is what Im going for. 4 subs per amp Total of 8 subs and 2 amps. Each sub should see around 750 watts.

 

[mgcauctions09 10+ year member]

anyone still don't understand?

 

[mgcauctions09 10+ year member]

Or i can do this, option #1 http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=2&woofer_imp=4

Put 2 subs for every channel @ 1 ohm. That will give every 2 subs 1500 watts (750 each)