what do i need for a salt 8k

  • 5
    Participant count
  • Participant list

sounds_explicit

Senior VIP Member
currently im building a system in a tahoe 3 xv3 15s on a salt 8k at 1.33 ohms
rockford 600.4
possibly a 0-5k for mids tuned down ofc...
i have a brand x 390 alt voltage regulator at 14.8
plat agm under hood
northstar in rear
grabbing a brand x 6k bat
im sure that may be enough for that but i need more runs of power and ground.
i have 2 runs from front bat to rear bat.
big 3 done
1 rear ground

how many more runs from front to rear bat pos should i do
and how many runs of ground from front to back.
i plan on running about 2-3 ground from rear bank to frame underneath truck via a gromet in 3rd row.
 
I'll say add another pos battery run to make it 3 front to rear.

As for grounds I add 2 more than the total number of amplifier grounds to the rear battery because discharging is important
 
well here lemme say this. the 2 runs of pos from front to rear are 1/0 welding wire. from the rear bat everything else is 2/0 welding wire. so with that being said. i also have no dedicated ground from front to rear. is that a must? or can i ground the 2 batts in rear to frame with a few short runs.

so should i still run just 1 more run or try for 2. i can do the 3rd run in 2/0.

also i plan on runnning 6 pos 6 ground from the amp instead of 3/3.

main question is i guess. should i run 1 dedicated ground?
along with 1 more run of pos? or just 1 more good run of pos and make sure the rear batts are grounded to frame?

also the amp calls for 800 amps of fusing atm my 2/0 runs from fuses to amp is fused with 2 runs at 350 amps.
what would you suggest i run fuse wise to the salt8 amp? if i ran 3 runs should i do 300 amp fuses each run? 6 runs same thing?
 
Not sure if you're in a rush but you can also email brand x. Let them know your goals and your setup. They'll tell you what's enough. I did the same with underground power
 
Activity
No one is currently typing a reply...

Similar threads

The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
246
Yup , the dsp should have input sections, it may have one for sub? Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
2
250
Thanks man! Quitting drinking and battling DRESS syndrome has given me a new outlook on life.
8
601
This may be an option for you as well. Im sure Amazon has them on theyre site also to be purchased. Great amps...
11
515
If you can find these in your area. Id recommend these for drop ins. They play from 40Htz on up. Sound very nice on amplified power for premium...
1
473

About this thread

sounds_explicit

Senior VIP Member
Thread starter
sounds_explicit
Joined
Location
cleveland ohio
Start date
Participants
Who Replied
Replies
9
Views
1,057
Last reply date
Last reply from
audiobaun
IMG_1154.png

GoldCountryCA

    May 5, 2024
  • 0
  • 0
IMG_1153.png

GoldCountryCA

    May 5, 2024
  • 0
  • 0

Latest topics

Top